Plywood coated with colour film inspections and QC checklist

Plywood coated with colour film inspections and QC checklist

Both sides of THE  plywood board are coated with a translucent, coloured film that leaves the wood grain visible.

The Decorative plywood is an ideal material for the furniture and joinery industries. Its features provide smooth and superior surfaces that are ready for use.

  • coloured, translucent film leaving the wood grain visible
  • for interior and exterior applications
  • taint and odour free panel suitable for food products
  • smooth surface easy to keep clean


Plywood coated with colour film  applications

  • desks, table tops, shelves
  • fittings for kitchens, offices, shops and kindergarten furniture
  • joinery products, interior cladding
  • signs, billboards
  • vehicle building

Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.

Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.

All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.

The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.

As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.

Specification according to TU 5512-002-44769167-98
Dimensions, mm 2500 х 1250, 1250 x 2500
Thickness, mm 6, 9, 12, 15, 18, 21, 24, 27, 30.
Tolerance on length (width) +/- 2mm
Grade of face veneer 1, 1/2, 2
Number of plies from 5 up to 21 depending on thickness
Surface color in assortment
Edges processing by waterproof acrylic paint
Basis birch plywood
Formaldehyde emission class E1 (up to 8 mg per 100g of bone dry plywood)
Water resistance WBP mark
Moisture content, max 5-12 %
Ultimate shearing strength not less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)
Ultimate tensile strength not less 40 MPa
Ultimate creasing strength not less 60 MPa
如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

Kitchen cabinets Finishing process

Kitchen cabinets Finishing process Conversion Varnish based paints and stains are now available for …

Leave a Reply

Your email address will not be published. Required fields are marked *