Plywood Cold press (Pre press) Machinery

Plywood Cold press (Pre press) Machinery

Cold press (Pre press)
Plywood can be made effectively without trouble from high moisture veneer..
Troubles inside hot press caused by turning of veneer and produced rate of inferior plywood were remarkably decreased and as a result, operation rate of hot press was raised up.
Control by pressure gauge with micro switches, and compresses automatically if pressure will be down from your setting pressure
New designed frame, to ensure machine steady and use life
The ram use metal FCD-50, hardness 50~60 with high accuracy processing. the dense proper high not easy oil leak to lengthen the service life, reduce the cost of maintenance
Type Size of product Size of platen Total pressure Unit pressure Main Ram Up Ram Daylight Ram stroke
CP-200-48 4’x8 1370x2700mm 200ton 6.7kg/cm² Ø250mm X2pcs Ø80mm X2pcs 1200mm 1200mm
CP-300-36 3’x6′ 1100x2100mm 300ton 18.1kg/cm² Ø300mm X2pcs Ø60mm X2pcs 1200mm 900mm
CP-350-55 5’x5′ 1800x1800mm 350ton 13.6kg/cm² Ø330mm X2pcs Ø60mm X2pcs 1200mm 900mm
CP-500-55 5’x5′ 1800x1800mm 500ton 19.5kg/cm² Ø375mm X2pcs Ø60mm X2pcs 1200mm,
1500mm
900mm
CP-500-48 4’x8′ 1370x2700mm 500ton 16.8kg/cm² Ø375mm X2pcs Ø80mm X2pcs 1200mm,
1500mm
900mm
CP-650-4×10 4’x10 1400mmx3300mm 650ton 15.2kg/cm² Ø375mm X3pcs Ø80mm X2pcs 1200mm 900mm
CP-700-5×10 5’x10′ 1800mmx3300mm 700ton 13.9kg/cm² Ø375mm X3pcs Ø100mm X2pcs 1200mm,
1500mm
900mm
CP-700-4×12 4’x12′ 1400mmx3900mm 700ton 14.6kg/cm² Ø375mm X3pcs Ø100mm X2pcs 1200mm,
1500mm
900mm

Custom machine specifications are available.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

Plywood Hot Press, One of the Major Equipment for Plywood Production

Plywood Hot Press, One of the Major Equipment for Plywood Production Plywood hot press is …

Leave a Reply

Your email address will not be published. Required fields are marked *