Plywood Films : Part 2 Phenolic Glue Film

Plywood Films : Part 2 Phenolic Glue Film

Phenolic surface paper is an adhesive sheet made by impregnating craft paper with phenolic resin that is resistant to water and pollution. The sheets are dried and attached to plywood using hot pressure. Phenolic surface paper is used in concrete shuttering and construction industries.

  • The surface of phenolic surface paper is impregnated with phenolic resin, which is highly resistant to water and abrasion and very precise. It allows reducing concrete casting time and saving construction costs.
  • Phenolic surface paper can be used intensively more than ten times. As a water-resistant material, it does not rust away, while its adhesive layers do not develop cracks.

Production phenolic films and impregnated paper (Kraft paper) for the inner layers of decorative laminates or wood panels such as film faced plywood .

Film Manufacturing process

  • Insertion,
  • Impregnation,
  • Drying,
  • Cooling,
  • Cutting,
  • Packaging,

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

Impregnated film

Impregnated film is made of the following materials: paper, urea-formaldehyde resin, melamine-formaldehyde resins, hardeners and …

Leave a Reply

Your email address will not be published. Required fields are marked *