Plywood QC Inspection Checklist : Part 11 Simple way test the load-bearing performance

Plywood QC Inspection Checklist : Part 11 Simple way test the load-bearing performance

Tilt the plywood 45 degrees, then stand on the board and jump to test whether the structure of the board is reasonable, load-bearing performance and so on. If it is a plywood of furniture grade, a person of 50 to 60 kilograms usually jumps on the board for a few times. If there is no clicking sound coming from the inside of the board, the structure of the board can be simply judged to be very good. If there is a click sound inside the board, it indicates that the structure of the board or the materials used are not qualified. If it’s a film faced plywood or construction grade plywood, it takes 60 to 80 kilograms of people to jump on the board, usually tilting the board 40 degrees.

The workers tilted the whole piece of plywood  on two edges and stretched the whole piece of plywood .The plywood is   leaning at 45  degree angle can be easy for workers to stand on the plywood and jump . 

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

plywood complies with the following CE certification requirements

CE2+ CERTIFICATION plywood complies with the following CE certification requirements: i)       EN 636-3 S (Structural …

Leave a Reply

Your email address will not be published. Required fields are marked *