Plywood QC Inspection Checklist : Part 29 HPVA Laboratories Physical Testing

Plywood QC Inspection Checklist : Part 29 HPVA Laboratories Physical Testing

ANSI/HPVA HP-1 Hardwood Plywood Test Methods
    • Section 4.3 Dry Shear Test (Technical and Type I Plywood)
    • Section 4.4 Cyclic-Boil Shear Test (Technical and Type I Exterior Plywood)
    • Section 4.5 Two-Cycle Boil Test (Technical and Type I Exterior Plywood)
    • Section 4.6 Three Cycle Soak / Type II Bond Line Test (Type II Interior Plywood)
    • Section 4.7 Moisture Content Test
ANSI/HPVA EF Engineered Wood Flooring Test Methods
    • Section 4.2 Bond Line / Three Cycle Soak Test
    • Section 4.3 Moisture Content Test
    • Table 3 Evaluation of Engineered Wood Flooring Tolerances (Width Tolerance, Overwood, Crook, End Alignment, Flatness, Uniformity of Thickness, Product Coverage Area)
ASTM Test Methods
    • ASTM D4442: Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials (Method B only)
    • ASTM D1037: Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials (Modulus of Elasticity MOE, Modulus of Rupture MOR, Static Bending, Tension/Compression, Fastener Holding, Hardness, Shear, Falling Ball Impact, Abrasion Resistance, Water Absorption, Linear Expansion, Cupping and Twisting, and more!)
Consumer Product Safety Commission (CPSC) Test Methods
    • CPSC-CH-E1002-08.1 – Standard Operating Procedure for Determining Total Lead (Pb) in Non-Metal Children’s Products
  • Special thanks to the original source of https://www.hpvalaboratories.com/physical-testing

They also have Fire Testing,Emissions Testing,Environmental Testing and Physical Testing

Check Also

Gurjan Keruing Face Veneer inspection Report and QC checklists

Gurjan Keruing Face Veneer inspection Report and QC checklists,Gurjan Keruing Face Veneer Grades and Specifications

Leave a Reply

Your email address will not be published. Required fields are marked *