Poplar bleaching veneer for painting

Poplar bleaching veneer for painting

Brush the surface of poplar bleached veneer with nitrocellulose varnish, wait for the paint to dry out, and then polish the veneer with sandpaper.

For the second paint, generally three or more times of paint construction are required. After the completion of the construction, two times of oil brush primer are required, and the pinholes left during the construction shall be made up for ash construction, nailing or wood glue hot pressing.

After the completion of the whole paint priming, polish the finish with clear water for more than two times until no traces of the oil brush can be seen.

After all processes of poplar bleached face leather are finished, paper skin shall be used for protection, and shall not be placed in the place of direct sunlight to avoid mildew, discoloration, cracking and other problems.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Veneering or overlaying birch plywood with plastic, cork and various other materials inspection,quality control ,sourcing and testing

Veneering or overlaying birch plywood with plastic, cork and various other materials   Standard options Veneering …

Leave a Reply

Your email address will not be published. Required fields are marked *