Poplar Core veneer

Poplar Core veneer is normally from China and Europe .China poplar core veneer is heavier than europe poplar veneer .

Poplar based Veneer are normally used in the chinese plywood production or export to Far east asia such as malaysia ,vietnam and indonesia for plywood production .
Standard dimensions available  :

length 2200-2500 mm ; width from 620 to 1200  mm

Nominal thickness available /Thickness

from 1.2 mm to 3.8 mm

Not all producs are available in all the above thicknesses.

Dimensional Manufactoring Tolerances /Width

– /+0.10 mm

Rotary poplar veneer, also known as whole piece poplar wood veneer or rotary cut spliced poplar veneer is typically a pale cream to a green tinged light yellow color wood with patches of green and occasional purple streaks. It is available in 4′ x 8′ sheets . Poplar wood veneer is also available in a 4′ x 10′ size .

It is a typically a whole piece veneer face but can be spliced and have some seams or splice lines, with the grain running along the 8’ dimension. Rotary cut poplar wood veneer commonly allows for some defects such as occasional pin knots, mineral streaks and irregular grain patterns. Poplar is a hardwood of medium density, easy to work with and strong. It has a smooth texture, tight uniform grain and a satiny sheen. Rotary cut poplar veneer will accept stains and finishes well and is often stained with bold colors or to mimic other species.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Engineered face Veneer Production Processes and technology,qualitly control ,inspection and testing ,sourcing

Engineered veneer uses wood that has been subjected to manufacturing processes. This type of wood …

Leave a Reply

Your email address will not be published. Required fields are marked *