Production process characteristics of HPL laminates  board

High Pressure Laminates HPL,Production process characteristics of HPL laminates  board,High pressure laminate production line,formica board press line,

 

The HPL laminates  board is made of decorative colored paper and kraft paper, which are dipped and dried separately. After drying, the kraft paper is stacked in the way of top and bottom. The number of kraft sheets depends on the thickness of the board required by the customers. Then, the kraft paper is placed in a high temperature and high pressure machine, at 300 degrees Fahrenheit (about 150 degrees Celsius), and each square is added. An inch of 1430 pounds of pressure, continuous balanced pressure for an hour, and then trimming, grinding, quality inspection and other steps to produce. The produced sheets are abrasion-resistant, scratch-resistant, impact-resistant, acid-alkali-resistant, high temperature-resistant, flame-retardant, antifungal, mildew-proof, antistatic, easy to clean, processability and applicability are very strong, of course, it also needs good quality sheets to achieve. If you have more needs, you are welcome to call for advice, to provide you with the best quality products and the most intimate service!

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

COMPACT LAMINATES inspection,grading,testing,quality control,manufacutring consultant

HPL Compact black core is available in a thickness range from 2 to 15 mm …

Leave a Reply

Your email address will not be published. Required fields are marked *