Film :Reasons for delamination of Film Coated Paper

Reasons for delamination of Film Coated Paper

Reasons for delamination of Film Coated Paper

First, it may be that the base paper is recycled paper, and the paper itself is not good, so the immersion is not uniform and there is no penetration when dipping, so the layer is delaminated. In addition, there is no pressure synthesis when hot pressing, and the film paper delamination appears in the demoulding or use.

Secondly, it may be that the temperature of hot-pressing plates is low, the adhesion of membrane paper is not good, and there are delamination.

Thirdly, the impregnated glue of the   paper itself is not good, which affects the uniformity of the adhesive adhesion of the paper itself and leads to the delamination.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

The steps involved in formwork (FILM FACED PLYWOOD )

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use …

Leave a Reply

Your email address will not be published. Required fields are marked *