Recon Veneer Manufacturing Process

Recon Veneer Manufacturing Process

Recon veneers is short for reconstituted wood also know as recomposed, man-made or manufactured veneers.

So what is recon veneer?

Recon wood veneers are made with actual wood from fast growing trees in managed forests. Recon veneers are a renewable product and also it is an environmentally friendly alternative to some of the rarer and extremely expensive veneers.

How is it made?

Our NAV & EVN are made through these 5 general steps

 

 

  1. ROTARY CUT VENEER

Picture1

The timber logs are rotary cut to produce the veneer. We do this by rotating the log around its axis. A knife is positioned against the log to peel off a thin layer of wood. During this process we also cut the correct width of the wood.

 

  1. DYEING

Picture2

Dyeing is a very important part of the process when producing reconstituted veneer.

The veneer strips are submerged in a bath of water at a specific temperature and with the required dye concentrate.

The dyeing process uses 100% water-based dyes. No heavy metals or other toxic substances are used

NAV and EVN reconstituted veneer strips are dyed multiple times to ensure colour-fastness.

Both NAV and EVN guarantee color-fastness up to 5 years

 

  1. CREATING THE PATTERN

Picture3The dyed veneer strips are mixed to produce the desired reconstituted wood species or design.

Here, the eye for detail and beauty work to complement the deep color-fastness of our veneers

 

  1. GLUING

Picture4The pile of veneer is glued after stacking as a block. Glue is applied to each strip during this process. The glue also influences the final appearance of the product because we can also add staining components to it.

 

  1. PRESSING THE LOGS

Picture5The veneer block is now placed in a press. The press plates can be flat or have a certain shape. This also has an impact on the appearance.

 

Picture6

What is reconstituted veneer ?

Reconstituted veneer is manufactured using real wood but not the actual wood of the wood species. We explain the process below.

1. ROTARY CUT VENEER

The logs of ayous, spruce or poplar are rotary cut to produce the veneer. We do this by rotating the log around its axis. A knife is positioned against the log to peel off a thin layer of wood. During this process we also cut the correct width of the wood.

2. DYEING

Dyeing is an important part of the process when producing reconstituted veneer. The strips of veneer we described in step 1 are stained in the desired colour. The veneer strips are submerged in a bath of water at a specific temperature and with the required dye concentrate. The dyeing process uses 100% water-based dyes. No heavy metals or other toxic substances are used to manufacture the Look’likes collection.

3. CREATING THE PATTERN

The dyed veneer strips are mixed to produce the desired reconstituted wood species or design.

4. GLUING

The pile of veneer is glued after stacking as a block. Glue is applied to each strip during this process. The glue also influences the final appearance of the product because we can also add staining components to it.

5. PRESSING THE LOGS

The veneer block described in step 4 is now placed in a press. The press plates can be flat or have a certain shape. This also has an impact on the appearance. For example: using a wavy press plate can be used to obtain the appearance of a rotary veneer structure.

Reconstituted veneers and natural veneers are similar in the fact that they are both wood materials. Natural veneer is obtained by slicing timber logs. As for recon veneers, a process of dyeing, laminating & re-slicing is added before you obtain the desired colour & pattern.

Manufactured from sustainable sources, reconstituted veneer maximises use of the wood log while retaining the unique qualities of its origins producing stunning natural wood grain appearance, while being uniform and consistent across the panels. We offer consistent colours, unique grain patterns & contemporary designs. Our products are manufactured using finest grade facto inputs in compliance with international quality standards and extensively tested on various parameters.

May you have the following keywords want to check ,

reconstituted veneer process,

reconstituted veneer suppliers,

veneer wood,

recon veneer price,

veneer cutting,

artificial veneer,

reconstituted ebony veneer,

veneer lamination process,

Special thanks to the original sourceo of

1.http://www.challpac.com/testing/

2.https://www.looklikesdecospan.com/en/Reconstituted_veneer/

3.http://engineerply.com/recon-veneers/

4.

 

Check Also

Estonian, Latvia birch veneer production and QC checklists

Estonian, Latvia birch veneer production and QC checklists NOrmally the birch face veneer are whole …

Leave a Reply

Your email address will not be published. Required fields are marked *