Rotary cut   veneer inspection and checklist

Veneer is a thin slice of wood made by rotary cutting or slicing of the log. The appearance of veneer varies and it depends on how the log is cut.

Veneer production process

The production process for veneer varies slightly according to the mill and the end use.


Rotary cut   veneer, Thin but strong veneer  .

The standard thickness of  Veneer is 0.25mm to 1.2 mm. Thicker veneers are available by request. The moisture content will be according to a customer’s specification, with standard tolerance +/- 2 % or moisture controlled tolerance +/-1 %.

Face veneer QC should go through constant quality assurance processes at all stages of the production. Dimensions, moisture and quality are measured several times to ensure the right Quarantee.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source,If you find that our articles infringe on your copyrights and interests, please email us at in time and we will delete it at the first time.

Check Also

Differences between Natural and Engineered Wood Veneers

Differences between Natural and Engineered Wood Veneers Wood veneers are attractive and rightfully popular materials …

Leave a Reply

Your email address will not be published. Required fields are marked *