Study on the production technology of bamboo plywood for building formwork
Abstract: bamboo plywood for building formwork is a bamboo wood-based panel made of bamboo by splitting, weaving, gluing and hot pressing. The moisture content of the semi-finished products used in the production shall be controlled at 5-8%. The adhesive shall be modified with p-type flexible agent and mixed with A-type buffer before painting. The amount of adhesive is 300-350g / cm 2 for both sides of the bamboo mat and 250-300g / m2 for both sides of the bamboo curtain. The hot pressing process adopts the three-stage type, namely, low pressure maintaining – high pressure maintaining – pressure reducing and pressure maintaining. The low pressure section is maintained for 1-2 min under the unit pressure of 5-10 kg / cm ~ 2, the high pressure section is maintained for 3-8 min under the unit pressure of 30-50 kg / cm ~ 2, and the pressure reducing section is maintained for 2-3 min under the unit pressure of 3-6 kg / cm ~ 2. The hot pressing temperature is about 130 ℃.
Key words: bamboo plywood production process如无特殊说明，文章均为本站原创，转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at email@example.com in time and we will delete it at the first time.