SVL Faced Panel on Falcata Blockboard Inspection and QC checklist

SVL Faced Panel on Falcata Blockboard Inspection and QC checklist

The  SVL (Solid Veneer Lumber) Faced Panel is made from approximately 3mm thick SVL laminated onto both faces of  Falcata Blockboard. The SVL Faced Panel on Falcata Blockboard is suitable for use on over-sized doors.

SIZE – AVAILABLE GOOD ONE SIDE OR GOOD TWO SIDES, LONG GRAIN

SINGLE CORE

3030mm x 1210mm x 22, 24, 27, 34mm

TRIPLE CORE

3030mm x 1210mm x 44, 46, 51, 56, 65, 79mm

The 3mm SVL is pressed on a single core or triple core light-weight  Falcata Blockboard.

The boards are light weight – from 350 to 430 kg/m3 depending on the thickness and overlay, it is approximately half the weight of MDF. The Falcata Blockboard hold screws very well and is strong and stable due to its construction.

The thicker boards are typically used for internal doors, sliding doors, pivot hinged doors, large conference and meeting tables, long span shelving or high quality joinery/furniture. The thinner panels are used for cabinetry, shelving, cladding etc.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Indonesian Plywood Standard 

Indonesian Plywood Standard Standard BS British Standard IHPA International Hardwood Products Association IPS Indonesian Plywood …

Leave a Reply

Your email address will not be published. Required fields are marked *