Tag Archives: drying

Production process of laminated veneer lumber

Production process of laminated veneer lumber Suitable for application: structural plywood I. General Situation Laminated veneer lumber (LVL) is a new type of man-made wood, which is made of small diameter and low quality logs, and is cut into veneers with thickness of more than 3 mm and bonded with …

Read More »

Manufacturing rotary veneer from small logs

Manufacturing rotary veneer from small logs Special thanks to the original source of https://www.aciar.gov.au/publication/guide-manufacturing-rotary-veneer-and-products-small-logs , a veneer is a thin layer of wood usually 1–4 mm in thickness, removed from a log using a rotary peeling process. Other forms of veneer such as sliced or sawn veneers are not discussed.The process of …

Read More »

Manufacturing Process of Wood Veneer

Manufacturing Process of Wood Veneer Special thanks to the original source of https://gharpedia.com Gharpedia.com helps to Build/Own/Rent/Buy/Sell/Repair/Maintain your dream house by providing all the tips & tricks in easy languages. It provides solutions to all problems pertaining to houses right from concept to completion. The manufacturing of wood veneer includes all …

Read More »

Plywood Films : Part 2 Phenolic Glue Film

Plywood Films : Part 2 Phenolic Glue Film Phenolic surface paper is an adhesive sheet made by impregnating craft paper with phenolic resin that is resistant to water and pollution. The sheets are dried and attached to plywood using hot pressure. Phenolic surface paper is used in concrete shuttering and …

Read More »