Technical Information (WBP Plywood)INspection and QC checklist

Technical Information (WBP Plywood)INspection and QC checklist

Technical Characteristics (Average)
Property Unit Mean Value Test Method BSI Standard Reference
Bonding Quality Pretreatment 5.1.1 N/mm2 1.17~1.92 Immersion 24 hours in water 20oC & Pull Test  EN314-1:1993
Apparent Wood Failure % 25
Pretreatment 5.1.4 N/mm2 1.00~1.43 Immersion 72 hours in boiling water 100oC & Pull Test EN314-2:1993

 

Apparent Wood Failure % 40
Bending Strength / Modulus of Elasticity Lateral N/mm2 37 Push Test EN310:1993
Longitudinal N/mm2 52
Lateral N/mm2 4625
Longitudinal N/mm2 6043
Density kg/m3 592 Weighing EN323:1993
Moisture content % 6~9 Weighing EN322:199

Check Also

Factors Influencing the Quality of Plywood

Factors Influencing the Quality of Plywood 1. Adhesive quality The performance of synthetic resin adhesives …

Leave a Reply

Your email address will not be published. Required fields are marked *