Ten major events of China’s forest products industry in 2021
At 12:12 on January 13, 2022, http://k.sina.com.cn/article_7517400647_1c0126e4705902dtuw.html and http://lyj.hunan.gov.cn/lyj/xxgk_71167/gzdt/gndt/202201/t20220113_22461062.html
The forest products industry involves wood-based panel, wood household, forest chemicals, pulp and paper and other fields. It has a long industrial chain and a wide range of products. It can not only provide a large number of wood and products for national construction and people’s life, but also play an important role in increasing farmers’ income, consolidating the achievements of poverty alleviation and effectively connecting with rural revitalization.
In 2021, China’s forest products industry will have frequent highlights and hot spots. What events will deeply affect the development trend of the industry? What events are worth remembering together? After careful discussion and deliberation, experts from China Forest Products Industry Association, Wood Industry Research Institute of Chinese Academy of Forestry Sciences, forest products industry planning and Design Institute and other units finally determined ten major events of China’s forest products industry in 2021. Looking back on the major events in the industry in the past year may help us to understand and think about the forest products industry.
1. The overall environmental performance of wood-based panel industry has been comprehensively improved
In recent years, the environmental protection work of wood-based panel industry has undergone historic, turning and overall changes from recognition to practice. The environmental protection work is deeply rooted in the hearts of the people. The environmental protection management system of wood-based panel industry has been continuously improved, and remarkable results have been achieved in just a few years, especially in PM2 5. The organized / unorganized emission control and small and scattered treatment have been significantly improved, the pollutant treatment technology and facilities have made rapid progress, and the overall environmental performance of the industry has been comprehensively improved.
On March 1, 2021, the regulations on the administration of pollutant discharge permits were officially implemented, laying a legal foundation for the core system of fixed pollution source management – pollutant discharge permit system. In 2019, the wood-based panel industry began to apply for and issue pollutant discharge permits, and the pollutant discharge permit system has fully covered the industry. According to the technical guide for the formulation of emergency emission reduction measures for key industries in heavily polluted weather, in 2020, the wood-based panel industry started the hierarchical declaration and evaluation of enterprise environmental performance, and many enterprises took the lead in being rated as class A enterprises in environmental performance. Differentiated emission reduction measures play an important role in promoting and encouraging advanced and establishing models. The industry has gradually entered the stage of in-depth governance and differentiated management.
2. The world flooring conference and China International Flooring exhibition were held in Shanghai at the same time
On March 23, 2021, the sixth world flooring conference and the second China geowall integration conference were held in Shanghai. With the theme of “cultivating new business forms and enabling new growth”, the conference focused on global market dynamics, shared experience in the integrated development of geowall integration, displayed innovative cutting-edge technologies and discussed the high-quality development path of the industry, More than 400 industry elites attended the meeting and issued the code for integrated installation of ground wall and the white paper on consumption of stone wood polymer composite floor (stone crystal floor).
From March 24 to 26, 2021, the 23rd China International Floor materials and pavement technology exhibition was held in Shanghai, with an exhibition area of 200000 square meters, nearly 1800 exhibitors and 118000 visitors. The innovative achievements and products of ground integration and ground wall integration displayed by the participating units of the key R & D project “R & D and promotion of ground wall integration customization technology” of the State Forestry and grass administration have become the highlights of this exhibition.
3. The appraisal results of new products in forest products industry are fruitful
In order to implement the national development strategy and actively promote the innovative development of the forest products industry, in 2021, China forest products industry association actively organized scientific research institutes, universities and industrial enterprises to carry out new product identification in accordance with the measures for the administration of new product identification of China’s forest products industry, and completed 94 new product identification throughout the year, of which universities or scientific research institutes presided over, There are 17 new products completed through industry university research cooperation; There are 28 new products hosted by enterprises and completed in cooperation with colleges and universities or scientific research institutes; There are 46 new products independently completed by colleges and universities or scientific research institutes; There are three new products independently completed by the enterprise. According to the product type, it is mainly divided into four categories: 37 new wood and bamboo materials, 34 forest products and chemicals, 21 household products and 2 equipment.
4. Accelerate the green development of forest products industry
In order to implement the national “double carbon” goal and vigorously promote the green and low-carbon development of the forest products industry, in 2021, China Forest Products Industry Association issued an action plan to promote the “double carbon” strategy and promote green development, systematically carried out relevant special research, accelerated the development of group standards, comprehensively promoted green certification, and launched pilot projects for key enterprises. In July, China Forest Products Industry Association held the first training course on green manufacturing system, which deeply interpreted the policies and regulations of green manufacturing, green manufacturing system and technical specifications of green building materials; In September, an expert seminar on carbon neutralization in forest products industry was held to explore the carbon footprint evaluation methods of goods and services, and promote the carbon footprint as one of the key indicators to be considered in product design, processing and manufacturing and raw material selection; China forest products industry association actively promoted the evaluation of green factories. In December, Guangxi Fenglin Wood Industry Group Co., Ltd. was awarded the title of “green factory” by the Ministry of industry and information technology; The group standard of formaldehyde free wood-based panel and its products issued by China forest products industry association has been widely accepted, which has promoted the green development of the industry.
5. The construction of forestry industrial parks and characteristic areas is progressing smoothly
Entrusted by the development and Reform Department of the State Forestry and grass administration, China forest products industry association undertook the evaluation of the second batch of national forestry industry demonstration parks. According to the requirements of the measures for the identification and naming of national forestry industry demonstration parks and the implementation plan for the on-site audit of the second batch of national forestry industry demonstration parks, an expert group was organized to jointly audit the on-site audit of industrial demonstration parks with provincial forestry competent departments. After the audit materials and group discussion of the expert group, 59 industrial demonstration parks were approved.
In order to further expand the development advantages of characteristic regions in the industry and help the high-quality development of regional economy, the Symposium on naming and co construction of characteristic regions was held in Nankang, Jiangxi Province in April 2021. The meeting shared the good experiences and practices of various characteristic regions in promoting the development of forest products industry, and discussed the cooperation mechanism to further strengthen the development of characteristic regions, so as to lay a good foundation for the joint construction of the association and characteristic regions. In July, China Forest Products Industry Association issued the notice on further deepening the identification and co construction of characteristic regions of China’s forest products industry, which made systematic work arrangements for the identification and co construction of characteristic regions.
6. The standardization of forest products industry groups has been steadily promoted
In 2021, China forest products industry association approved 13 group standards and issued and implemented 9 group standards, They are: Green anticorrosive and modified wood, ultra-thin bamboo particleboard, grade division and evaluation of Forest Scenic path, flame retardant directional particleboard, specification for information integration interface of wood product surface finishing equipment, double petal red rose liquid, quality requirements for edge sealing of wood-based panel customized household panels, and light high strength particleboard Impregnated adhesive film paper facing ultra-thin fiberboard composite plywood. By the end of 2021, the association had 27 group standards under research, covering wood products, non wood forest products, forest chemical products, intelligent manufacturing and the implementation of “double carbon” strategy.
In 2021, China forest products industry association made new progress in promoting the internationalization strategy of standards. Government departments and industry organizations in Britain, Laos, Malaysia, Japan, Indonesia and other countries have decided to adopt the group standard of China Wood legitimacy recognition issued and implemented by China forest products industry association in terms of wood legitimacy recognition and many cooperation.
7. Advocate the implementation of “conscience quality project” and promote the full implementation of E0 standard for wood-based panels and their products
In March 2021, the State Administration of market supervision and the National Standardization Administration announced that the standard GB / T 39600-2021 classification of formaldehyde emission from wood-based panels and their products under the centralized management of the National Technical Committee for wood-based panel standardization was officially implemented on October 1, 2021. The standard divides the formaldehyde emission of indoor wood-based panels and their products into three levels according to the limit value: E1 level (≤ 0.124 mg / m3), E0 level (≤ 0.050 mg / m3) and enf level (≤ 0.025 mg / m3). The release and implementation of the new standard provides a scientific basis for greatly improving the quality of wood-based panels and products, and provides a new opportunity for the transformation, upgrading, innovation and development of the whole industry.
In order to promote the full implementation of E0 standard for wood-based panels and their products, China Forest Products Industry Association, China wood and wood products Circulation Association, China economic media association and China home green supply chain national innovation alliance jointly launched and implemented the special activity of “conscience quality project”. With the purpose of promoting the “double carbon” strategy, implementing the “healthy China” strategy and meeting the people’s growing needs for a better life, the “conscience quality project” provides the society with a variety of high-quality E0 products to improve the E0 product service system. At the same time, it calls on relevant production and circulation enterprises, teaching, scientific research and testing institutions, regulatory authorities Media and social enthusiasts actively support and join the construction of “conscience quality project”, jointly promote the green and high-quality development of China’s forest products industry, and contribute to the construction of a beautiful and healthy China.
8. Release the corporate social responsibility report of forest products industry for 10 consecutive years
Fulfilling social responsibilities and making commitments and examples to all sectors of society are the inevitable choice for the sustainable development of key enterprises in the industry. Since 2011, China forest products industry association has issued the social responsibility report of China forest products industry enterprises for 10 consecutive years.
On December 25, 2021, the 2020 social responsibility report of China’s forest products industry enterprises, jointly prepared by China Forest Products Industry Association, the information center of the Institute of wood industry of the Chinese Academy of Forestry Sciences, and 17 enterprises such as chenafuno wood industry (China) Co., Ltd., Daya Shengxiang home furnishing Co., Ltd. and nature home furnishing (China) Co., Ltd., was released in Beijing. The report contains rich and accurate graphic information, comprehensively showing the development process of the enterprise in the past year and its responsibilities to the state, society, industry, customers, partners, environment and other parties; The publishing enterprise is not only committed to providing the most environmentally friendly forest products for the society, but also hopes to become an industry model and promote social progress with professional strength and enterprise influence. Practice has proved that enterprises undertaking social responsibility will better maintain a good situation in the development of the industry and promote the improvement of their own strength and industry influence.
9. The tax rebate for comprehensive utilization of wood-based panel resources shall be strengthened to promote the sustainable and healthy development of the industry
The wood-based panel industry uses agricultural and forestry residues as raw materials. Since the implementation of the value-added tax levy and refund policy in 2001, it has not only promoted the rapid and healthy development of China’s wood-based panel, furniture, flooring and related industries, and the comprehensive utilization rate of wood is leading the world, but also driven the development of upstream industries and enhanced the afforestation enthusiasm of the whole society. It is important to improve forest coverage and ensure national wood safety, It has played a positive role in helping poverty alleviation and promoting the construction of ecological civilization.
In order to better promote the comprehensive utilization of resources and ensure the sustainable and healthy development of the national economy, the Ministry of Finance and the State Administration of Taxation issued the announcement on improving the value-added tax policy for comprehensive utilization of resources (Announcement No. 40 of the Ministry of Finance and the State Administration of Taxation in 2021, hereinafter referred to as the announcement) at the end of 2021. On the basis of further expanding the scope of comprehensive utilization of resources and products in agricultural and forestry residues and other categories, the announcement increased the tax rebate proportion of fiberboard, particleboard, blockboard, biochar, activated carbon, tannin extract, furfural, box board paper and other comprehensive utilization products from 70% to 90%, and increased the tax rebate proportion of biomass crushed materials, biological natural gas Pyrolysis gas and bio oil were included in the catalogue of comprehensive utilization tax rebate products for the first time, with a tax rebate ratio of 100%. At the same time, the standardized operation requirements of enterprises applying for tax rebate were further clarified.
10. The international rights protection of forest products industry has a long way to go
In 2021, China Forest Products Industry Association United its members to continuously carry out “double anti” investigations against China’s multi-layer solid wood composite flooring, plywood, wood products and other products by the United States, as well as India’s anti-dumping investigation against China’s decorative paper.
With the unremitting efforts of Jiangsu Senmao Bamboo Wood Industry Co., Ltd. and other enterprises, the average anti-dumping tax rate of multi-layer solid wood composite flooring in China has been zero for 11 consecutive years since 2010, making a significant contribution to the international protection of rights of wood flooring enterprises; In 2021, the association actively responded to the second “double anti” investigation of plywood from the United States to China and made good progress. On February 9, the prosecution of plywood from the United States applied for change review. On February 18, the United States International Trade Court sent the anti circumvention ruling of plywood from China back to the United States Department of Commerce for retrial; On January 22, 2021, the U.S. International Trade Commission made a final ruling on the case of wooden decorative lines to China, determining that the import of the products involved from China caused damage to the domestic industry of the United States. China forest products industry association expresses its firm opposition to this, encourages and supports Chinese enterprises to take up legal weapons and actively appeal to safeguard their legitimate rights and interests; China Forest Products Industry Association organized relevant enterprises to hold a response coordination meeting with Indian decorative paper export enterprises, and actively responded to the “double anti” investigation of Chinese decorative paper products by the Indian government. After the active response of the enterprise, “printing decorative paper” was excluded from the scope of the investigated products, that is, any enterprise in China’s export of the product is not restricted by the anti-dumping order.如无特殊说明，文章均为本站原创，转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at firstname.lastname@example.org in time and we will delete it at the first time.