The classification and function of panel furniture hardware accessories, introduce 9 categories of panel furniture hardware!
Hardware fittings have always been the soul of panel furniture. The life of panel furniture depends on the hardware fittings used. However, this point is often ignored by consumers. A set of high-quality hardware can not only upgrade the practicality of furniture, but also prolong the life of furniture. Therefore, the hardware fittings of panel furniture are very important. Let me introduce to you the lock chain, connector, hinge, slide rail, support, etc. of hardware fittings in panel furniture.
What are the classifications and functions of plate furniture hardware fittings? Here are 9 categories of panel furniture hardware!
Types and functions of hardware fittings of panel furniture
1. Structural hardware accessories: sofa legs, metal legs, bed feet, cabinet feet, chassis, foot pads, etc.
2. Functional hardware accessories: screws, nuts, plate holders, three in one connecting pieces, slide rails, drawer rails, pull rods, shoe racks, eccentric wheels, hinges, horse drawn, partition accessories, etc.
3. Decorative hardware accessories: pendant, handle, aluminum edge sealing, etc.
The hardware commonly used in panel furniture mainly includes the following 9 categories:
Steel ball slide rail, furniture hinge, wheel, three in one connector, laminate support, handle, chair leg and other terms that seem familiar to us are actually called hardware accessories and are indispensable important members in the process of furniture assembly.
There are many kinds of hardware parts of panel furniture, which require the structure to be firm and reliable, and can be disassembled for many times, mainly meeting the functional requirements. With the formation of the modern furniture hardware industry system, the international organization for standardization issued iso8554 and iso8555 furniture hardware classification standards in 1987, which divided furniture hardware into nine categories:
Interlocking in multi drawer cabinets, a kind of interlocking system, also known as central locking system, is often used. It uses a plurality of brake pins on the guide rail to lock each drawer respectively, and uses only one lock head to lock multiple drawers at a time. There are two types of interlocking installation, namely: (1) the lock head is on the front of the drawer, and the guide rail is installed on the side plate; (2) The lock head and the guide rail are installed on the side plate at the same time.
There are many types of connectors. Typical types include eccentric connectors, screw connectors and plug-in connectors. Eccentric connector is widely used. It is suitable for industrial and high-efficiency production, firmly connected, can be disassembled and assembled at will and quickly, and does not affect the original appearance. It is mainly applicable to plate furniture. The eccentric connector is mainly composed of eccentric tensioner (eccentric), connecting rod (bolt) and embedded parts (expansion bolt). The pull rod has straight connecting rod and angle connecting rod.
There are many kinds of hinges, including hinge, door head hinge, glass door hinge, cup-shaped concealed hinge, special special hinge, etc. they are mechanical devices used to connect two solids and allow rotation between them. The hinge is composed of a movable component or a foldable material. The hinge is divided into full cover and half cover. The embedded is determined according to the side plate of the cabinet, and the thickness of the side plate is generally 16-18mm. The concealed hinge is divided into two parts: the base and the buckle. According to the bending arc of the buckle, it is divided into three types: the straight arm concealed hinge, the small curved arm concealed hinge and the large curved arm concealed hinge, which are respectively suitable for the full cover door, the half cover door and the embedded door.
4. Slide rail
The most commonly used slide rails in furniture are drawer guide rails and door slide rails. In addition, there are disc rotating devices for TV cabinets and dining tables, ring-shaped bottom paths for roller shutter doors, and joint devices for hinges and slides.
5. Position holding device
The commonly used position keeping devices include the swing door hanger, the back plate buckle, the bed adjuster, the double arm lifting hanger, and the cabinet hanging code.
6. Height adjustment device
The commonly used height adjusting devices include cabinet feet and adjusting feet.
The supporting parts are mainly used to support the furniture parts, such as the laminate bracket, the laminate bracket, the glass laminate pin, the clothes stick seat, etc.
Handle plays an important decorative role in furniture, with various forms and varieties. According to different materials, there are metal handles (zinc alloy handles, copper handles, iron handles, aluminum handles, stainless steel handles), marble handles, plastic handles, solid wood handles, ceramic handles, etc; According to the different installation positions, there are drawer handles, cabinet door handles, glass door handles, etc.
Casters are often installed at the bottom of cabinets and tables to move furniture. According to different connection methods, it can be divided into flat seat type, screw type and pin type.如无特殊说明，文章均为本站原创，转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at email@example.com in time and we will delete it at the first time.