Tubula Chipboard Manufacturing Process and Grading Rules

Tubula Chipboard Manufacturing Process and Grading Rules

Grading and quality inspection  checks are enforced at every stage of the manufacturing process. Random samples are tested for compliance with established standards in our well equipped factory laboratory.

    The fibre materials are RubberWood logs, branches and wood residue. Rubberwood is a light-coloured, medium density, homogeneous material suitable for producing high quality particleboard.
    The rubberwood materials are chipped before being reduced to fine flakes of the desired thickness and length. This contributes to the optimum strength and smooth finish on the surfaces of the boards.
    The wet flakes are dried in a hot gas dryer to the required moisture level. The dried flakes are then screened to separate fine and core particles and stored in the surface and core silo.
    The surface and core particles are separately mixed with glue, wax emulsion and other additives metered accurately to achieve quality of high standard.
    The resinated particles are spread by air and mechanical forming, incorporated by Computerised Programmable Control System, ensuring consistent mat density and uniform weight distribution.
    The Hot Press which operates automatically on Programmable Logic Control compresses the mat under high pressure and controlled temperature to form boards to precise thickness.
    The finished boards coming out from the Hot Press is weighed automatically to make sure that the determined density is obtained and are then placed on the Star Cooler to allow glue setting.
    The raw boards are stored for final curing to stabilise the board properties. These boards will later be calibrated to accurate thickness, sanded to fine surface finishes and graded.
    The master panel boards are checked for bonding conformance and thickness tolerance before side trimmed and cut to accurate dimension. The panels are stacked for intermediate storage.
    The graded plain boards may be laminated with melamine impregnated decorative paper by Short Cycle Press process or natural veneer. The boards are regraded and packed for final shipping

The tubular particle board manufacturers, produced in today’s advanced technology stand out with its price and models. The furniture sector is the most frequently used area, although there are different uses. All products used in living room, living room, bedroom, entree, kitchen and bathroom can be produced from tubular particle board furniture. Moreover, with a wide variety of patterns and colors. For those who like simplicity, different colors and designs are available for those who like simple, life-style and vibrant life. Hollow particle board furniture can be purchased from all furniture stores as well as from online store stores. In recent years, the usage area of hollow particle board has become increasingly widespread. Depending on the continuous development of technology, tubular chipboard furniture is being offered with different price ranges every day.

Tubula Chipboard Manufacturing Process and Grading Rules , Grading and quality inspection  checks, tubular particle board manufacturers
Tubula Chipboard Manufacturing Process and Grading Rules , Grading and quality inspection  checks, tubular particle board manufacturers


如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

OSB,Particle board,MDF Basics steps in the process

OSB,Particle board,MDF Basics steps in the process 1. Raw material prepared 2. Converted into particles …

Leave a Reply

Your email address will not be published. Required fields are marked *