Veneer quality control Part 10:Optimizing the Dyeing Process of Poplar Veneer by Response Surface Methodology

Veneer quality control Part 10:Optimizing the Dyeing Process of Poplar Veneer by Response Surface Methodology

Acidic dyes were used to dye fast-growing poplar veneers. The effects of dye solution concentration, dyeing time and dyeing temperature on the color difference of veneers were investigated. The quadratic regression model was established by response surface methodology (RSM) and the dyeing process was optimized. The results showed that ideal dyeing effect could be obtained when the mass fraction of dye solution was 0.52%, the dyeing time was 4.2 h and the dyeing temperature was 72 C. The chromatic aberration value is 62.54 NBS.

Key words: poplar veneer, dyeing, response surface analysis, regression model,

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Engineered face Veneer Production Processes and technology,qualitly control ,inspection and testing ,sourcing

Engineered veneer uses wood that has been subjected to manufacturing processes. This type of wood …

Leave a Reply

Your email address will not be published. Required fields are marked *