Veneer quality control Part 5:A New Method of Fast-growing Poplar Veneer Drying with High Quality

Veneer quality control Part 5:A New Method of Fast-growing Poplar Veneer Drying with High Quality

The method of continuous hot-pressing drying at 192 C was used to dry fast-growing poplar veneers. With appropriate “breathing” cycle, the 17 mm thick veneers (149% of initial moisture content) could be dried to 8% of final moisture content within 2 minutes. Dry veneer is flat, smooth, evenly moisture content, no tear. The average drying shrinkage of veneer thickness is 53% and that of cross grain is 49%. The average bonding strength is 0812 MPa, which meets the requirements of national standards. The results show that drying fast-growing poplar veneer by this method is an efficient and high-quality way.

keywords of this post :veneer drying process ,veneer dryer machine, veneer slicing methods, wood veneer manufacturing process, veneer slicing machine, small veneer machine ,veneer clipping,A New Method of Fast-growing Poplar Veneer Drying with High Quality

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

Distribution of Eucalyptus Log Resources in China

Distribution of Eucalyptus Log Resources in China As the main fast-growing forest species in China, …

Leave a Reply

Your email address will not be published. Required fields are marked *