What are the differences between natural wood veneer and dyed wood veneer

What are the differences between natural wood veneer and dyed wood veneer?

 

 

 

Natural wood veneer is processed from logs, which are boiled, planed, dried, cut and packaged to produce different kinds of wood veneer.

 

 

 

Natural wood veneer: Usually used in high-grade furniture, common natural wood veneer color from light to deep, there are maple, Allig, beech, white suppository, Fraxinus mandshurica, white oak, red oak, teak, yellow pear, red pear, walnut, white shadow wood, red shade wood, red sandalwood, black sandalwood and many other. High-grade panel furniture generally adopts the method of large area sticking natural wood veneer, solid wood edge sealing, small pieces of square bar using solid wood. Natural wood veneer is not only natural and beautiful, good performance, but also has a certain thickness. Now it is most used in about 0.3-0.6 mm, which has a good protective effect on furniture. Compared with real wood furniture, the cost is greatly saved.

 

Natural Wood veneer

 

 

 

 

 

Dyeing Wood Skin: A beautiful and exquisite new decorative material is made by using high-tech processing technology to deal with the defects of natural wood skin and dyeing it. It is now collectively called dyed wood skin. It is a beneficial supplement to natural wood skin. Because of its flexibility in color, it leaves designers with color imagination space. It is a new era decorative material. Material, processed and dyed with natural wood, without losing the characteristics of natural wood (light color difference and natural texture), can also play a creative special color (ordinary paint effect can only cover up the wood itself should have obvious texture, color difference, etc.) to add rich color to modern design. Seed color difference, flat, humidity not more than 10%, no residual chemicals, no odor.

 

 

 

dyed veneers

 

 

 

 

 

What is the difference between natural and dyed veneer?

 

 

 

What are the benefits of natural wood veneer? Guangzhou Birch Source Wood Industry for your analysis and answer, natural wood veneer raw materials are from pure natural, its texture can not be changed, more natural beauty. If the inner core is solid wood and the surface is made of various natural wood veneers, it will have a strong sense of three-dimensional, artistic, and has the characteristics of non-distortion and non-warping.

 

Natural wood veneer is more expensive than dyed wood veneer. At the same time, due to the large selection of natural wood veneer, whether from grade, quality, origin, or color, pattern, finish, can meet the needs of consumers. Therefore, natural wood is widely used in furniture, wooden doors, star hotel decoration and so on.

 

 

 

Dyed veneer has the following advantages:

 

Firstly, after treatment, the dyed wood veneer has smooth surface, which not only has rich color, but also satisfies the requirements of different decoration sites and the texture preferences of the buyers.

 

Secondly, we can restore all kinds of rare and precious timber, so that many consumers can complete the desire to move all kinds of even extinct tree products home without having to bear the high cost. This is the highlight of dyeing wood veneer.

 

Thirdly, the defect of log can be improved. Natural wood discoloration, wormholes and other unavoidable defects can also be overcome with the help of science and technology, better guarantee and optimize the combination of science and technology wood and natural wood.

 

Therefore, in summary, dyed wood veneer has the theory of “originating from nature, better than nature”.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Rotary Cut PLB veneer inspection,sourcing ,quality contorl ,manufacturing consultant service

PLB veneer Size : 8×4,7×4,6×4, 7×3,6×3 Thickness: 0.15-0.60 mm Grade : A, AB, B, C, …

Leave a Reply

Your email address will not be published. Required fields are marked *