wood drawers Corner Construction

wood drawers Corner Construction

Solid wood drawers may be ordered in either doetail or dowel corner construction. Plywood and Melamine drawers may be ordered in dowel corner construction ONLY.

Dovetail Corner Construction

Dovetail joinery shows on the side of the drawer. After assembly, the dovetail joinery is sanded smooth and finished. This provides a drawer with all sides finished and suitable for pull-out trays or exposed-front drawers.

Dowel Corner Construction

Dovetail joinery shows on the side of the drawer. After assembly, the dovetail joinery is sanded smooth and finished. This provides a drawer with all sides finished and suitable for pull-out trays or exposed-front drawers.

Program Drawers

Program Drawers are available in European Steamed Beech, Hard Maple And White Oak.

Drawer Side Thickness:

5/8″

Drawer Heights

2 1/4″ to 15 1/4″ in 1″ increments
(i.e. 2 1/4″, 3 1/4″, 4 1/4″ etc. )

Bottom Upset:

1/2″

Drawer Bottoms:

1/4″ or 1/2″ Bottoms to match side material species or other options, at customer request.

Dovetail Corner Construction

After assembly, the outside of the drawer is sanded to smooth the dovetail joint and a final finish coat is applied.

Dowel Corner Construction

This corner construction offers a cost savings because no sanding or final finish coat is needed.

Custom Drawers

Custom Drawers are available in most wood species, depending on local stock and availability.

Drawer Side Thickness:

1/2″ or 5/8″

Drawer Heights

2 1/4″ to 15 1/4″ in 1/4″ increments
(i.e. 2 1/4″, 2 1/2″, 2 3/4″ etc. )

Bottom Upset:

1/4″ – 3/8″ – 1/2″

Drawer Bottoms:

1/4″ or 1/2″ Bottoms to match side material species (if available) or other options, at customer request.

Dovetail Corner Construction

After assembly, the outside of the drawer is sanded to smooth the dovetail joint and a final finish coat is applied.

Dowel Corner Construction

This corner construction offers a cost savings because no sanding or final finish coat is needed.

Special Order Drawers

Dimensioned Drawings required for Special Order Drawers.

Drawer Side Thickness:

5/8″

Drawer Heights

2 1/4″ to 15 1/4″ by 1/4″ increments
(i.e. 2 1/4″, 2 1/2″, 2 3/4″ etc. )

Bottom Upset:

1/4″, 3/8″, 1/2″

Drawer Bottoms:

1/4″ or 1/2″

Dovetail Corner Construction

After assembly, the outside of the drawer is sanded to smooth the dovetail joint and a final finish coat is applied.

Dowel Corner Construction

This corner construction offers a cost savings because no sanding or final finish coat is needed.

File Drawer

Serpentine Drawers

Plumbing Drawers

Plywood Drawers

Plywood drawers are available in 1/2″ UV pre-finished Birch, with matching color PVC-banded top edge.

Drawer Side Thickness:

1/2″

Drawer Heights

2 1/4″ to 15 1/4″ in 1/4″ increments
(i.e. 2 1/4″, 2 1/2″, 2 3/4″ etc.)

Bottom Upset:

1/2″

Drawer Bottoms:

1/4″ or 1/2″ Bottoms to match side material species (if available) or other options, at customer request.

Dowel Corner Construction Only

Melamine Drawers

Drawers are available in Melamine, with matching PVC banding on top edge.

Drawer Side Thickness:

5/8″

Drawer Heights

2 1/4″ to 15 1/4″ in 1/4″ increments
(i.e. 2 1/4″, 2 1/2″, 2 3/4″ etc.)

Bottom Upset:

1/2″

Drawer Bottoms:

1/4″ or 1/2″ Bottoms to match side material species (if available) or other options, at customer request.

Dowel Corner Construction Only

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Drawer Sides Sourcing,buying Tips,quality control,inspection,manufacturing,testing

Drawer Sides Drawer sides are available in 3.5″, 4″, 6″, 8″, 10″ and 12″ widths …

Leave a Reply

Your email address will not be published. Required fields are marked *