100% BIRCH PLYWOOD MANUFACTURER

NAUF Plywood Manufacturers in North America: Verified Company Information, Adhesive Technologies and Product Specifications

1. Introduction

NAUF (No Added Urea Formaldehyde) plywood is an important category in the North American plywood and engineered wood panel industry.

The term describes plywood manufactured without intentionally adding urea-formaldehyde (UF) resin to the relevant adhesive formulation.

Different manufacturers use different adhesive technologies, panel constructions and manufacturing processes to produce NAUF products.

Some manufacturers specialize in decorative hardwood plywood using soy-based or other alternative adhesive systems. Others manufacture structural or industrial plywood using phenol-formaldehyde (PF) resin.

This article introduces four North American manufacturers whose official websites and published technical documents provide information about NAUF or related adhesive technologies:

  1. Columbia Forest Products
  2. States Industries
  3. Mt. Baker Products
  4. Richmond Plywood Corporation Limited (Richply)

The information below is based on publicly available manufacturer documentation and official US regulatory resources.

This is an independent technical overview, not a commercial endorsement or a market-share ranking.

2. Understanding NAUF, NAF and ULEF

Before comparing manufacturers, it is important to understand three commonly used industry terms.

NAUF – No Added Urea Formaldehyde

NAUF describes products manufactured without intentionally adding UF resin to the relevant adhesive system.

A NAUF product may use other adhesive technologies, including phenolic resin or certain alternative adhesive systems.

NAUF does not automatically mean that a product has zero formaldehyde emissions.

NAF – No Added Formaldehyde

NAF describes an adhesive or resin formulation without added formaldehyde.

Certain NAF resin systems may qualify for specific provisions under the applicable US formaldehyde regulations, subject to regulatory approval and documentation.

ULEF – Ultra-Low-Emitting Formaldehyde

ULEF refers to Ultra-Low-Emitting Formaldehyde.

ULEF products are evaluated under specific emission and regulatory requirements.

They should not be described as NAF simply because their emissions are low.

These three terms must be used according to the actual product formulation and applicable regulatory definitions.

3. North American NAUF Plywood Manufacturers

3.1 Columbia Forest Products – PureBond® Hardwood Plywood

Company: Columbia Forest Products

Official website:
https://www.columbiaforestproducts.com/

Product technology: PureBond®

Columbia Forest Products publishes technical information about its PureBond® hardwood plywood technology.

According to its official product documentation, PureBond uses a proprietary soy-based adhesive assembly process.

The company identifies PureBond panels as formaldehyde-free assemblies and describes relevant domestic veneer-core and composite-core constructions.

Its published Material Safety Data Sheet identifies the applicable domestic veneer-core decorative hardwood plywood as:

  • NAF (No Added Formaldehyde), or
  • NAUF (No Added Urea Formaldehyde).

The company also publishes separate technical documents for PureBond veneer-core and composite-core products.

These documents are important because the adhesive systems and substrate constructions may differ between product configurations.

Officially documented technical characteristics:

  • Soy-based adhesive assembly technology.
  • Decorative hardwood plywood products.
  • Veneer-core and composite-core constructions.
  • Product-specific safety data sheets.
  • Published technical and regulatory documentation.

Columbia Forest Products published a 2024 PureBond product information sheet reporting that its technology had been used to manufacture more than 150 million panels.

This figure is a company-published historical production statement, not an independently verified current production-capacity figure.

Official references:

PureBond product information:
https://www.columbiaforestproducts.com/plywood/purebond

Technical documents:
https://www.columbiaforestproducts.com/resources/technical-documents

PureBond Material Safety Data Sheet:
https://www.columbiaforestproducts.com/app/uploads/2014/08/MSDS-PureBond-Domestic-Veneer-Core.pdf

2024 PureBond product information:
https://www.columbiaforestproducts.com/app/uploads/2024/10/PureBond-Product-Sheet-91224.pdf

3.2 States Industries – NAUF and ULEF Hardwood Panel Products

Company: States Industries LLC

Location: Eugene, Oregon, USA.

Official website:
https://www.statesind.com/

States Industries publishes environmental and safety documentation for its hardwood panel products.

Its official Environmental and Safety Data page identifies NAUF product options for several panel constructions.

These include:

  • Particleboard Core.
  • MDF Core.
  • ArmorCore®.
  • ApplePly® Core.

The company also publishes a specific Safety Data Sheet titled:

Hardwood Plywood Containing Substrates Known to Contain Urea-Formaldehyde or Phenolic-Formaldehyde Resins, with Face and Back Veneers Bonded with an Adhesive Containing No Formaldehyde.

The document identifies the relevant products as NAUF and ULEF.

An important technical detail is that the document distinguishes the substrate resin from the adhesive used to bond the face and back veneers.

Therefore, it would be incorrect to interpret this particular SDS as evidence that every component of every listed panel construction is free of UF or PF resin.

The document is dated February 15, 2018, and was reviewed on February 2, 2020. Buyers should obtain the latest product-specific documentation before relying on it for a current order.

Officially documented technical characteristics:

  • Multiple hardwood plywood constructions.
  • NAUF product options.
  • ULEF product options.
  • Published SDS documentation.
  • Published environmental and regulatory certificates.

Official references:

Environmental and Safety Data:
https://www.statesind.com/environmental-safety-data/

NAUF/ULEF Safety Data Sheet:
https://www.statesind.com/wp-content/uploads/2020/08/States-SDS-NAUF-ULEF-Panel-V1.1-2.15.18-reviewed-2.2.20.pdf

3.3 Mt. Baker Products – Soy-Based NAUF Hardwood Plywood

Company: Mt. Baker Products, Inc.

Location: Bellingham, Washington, USA.

Official website:
https://mtbakerproducts.com/

Mt. Baker Products is a manufacturer of custom decorative hardwood plywood.

Its official Product Resources page states that all its hardwood plywood is manufactured using a soy-based adhesive described by the company as No Added Urea Formaldehyde (NAUF) glue.

The manufacturer identifies its adhesive technology as PlyClear®.

Its official FAQ also describes PlyClear as a soy-based No-Added Formaldehyde adhesive and states that its panels are manufactured using this technology.

The two descriptions should be understood in their respective contexts: NAUF refers to the absence of added UF resin, while NAF refers to the absence of added formaldehyde.

The company describes its business as specializing in custom decorative hardwood plywood, with product configurations developed according to customer specifications.

Officially documented technical characteristics:

  • Soy-based adhesive technology.
  • NAUF hardwood plywood.
  • PlyClear® proprietary adhesive technology.
  • Custom decorative hardwood plywood manufacturing.
  • Different veneer and core options.

For buyers, the manufacturer’s product resources and technical documentation are useful starting points for verifying adhesive specifications.

Official references:

Product Resources:
https://mtbakerproducts.com/product-resources/

Frequently Asked Questions:
https://mtbakerproducts.com/frequently-asked-questions/

Company website:
https://mtbakerproducts.com/

3.4 Richmond Plywood Corporation Limited – Richply

Company: Richmond Plywood Corporation Limited.

Brand: Richply.

Location: Richmond, British Columbia, Canada.

Official website:
https://richply.com/

Richply is a Canadian plywood manufacturer that publishes product specifications and technical information for several plywood categories.

Its official Product FAQs explain the difference between urea-formaldehyde and phenol-formaldehyde adhesive systems.

The company states that it uses phenol-formaldehyde resin adhesives in 100% of the plywood it manufactures.

PF and UF are different adhesive chemistries.

Phenol-formaldehyde is widely used in plywood manufacturing where moisture-resistant bonding is required.

Richply also identifies specific products as NAUF on its official product pages.

Examples include:

  • Richflor Underlayment.
  • Douglas Fir Plywood.
  • Canadian Softwood Plywood.
  • Marine Grade plywood.
  • Selected sanded industrial plywood products.

Its Richflor Underlayment page describes a Douglas Fir plywood panel manufactured using waterproof phenol-formaldehyde resin adhesive and identifies the product as NAUF.

The company publishes product specifications including nominal thicknesses, dimensions and construction information.

For example, its Richflor Underlayment product page identifies standard panel dimensions of 1220 × 2440 mm and lists 8.0 mm and 8.5 mm product options.

These specifications apply to the particular product described, not necessarily to the entire Richply product range.

Officially documented technical characteristics:

  • Phenol-formaldehyde adhesive technology.
  • No added urea-formaldehyde declaration for specified products.
  • Structural and industrial plywood categories.
  • Published product specifications.
  • Technical explanations of adhesive chemistry.

It is important not to describe Richply products as formaldehyde-free simply because they are NAUF. PF resin contains formaldehyde in its chemical structure.

Official references:

Product FAQs:
https://richply.com/resources-downloads/product-faqs/

Richflor Underlayment:
https://richply.com/our-products/construction-sheathing/richflor-underlayment/

Douglas Fir Plywood:
https://richply.com/our-products/construction-sheathing/douglas-fir-plywood-dfp-csa-0121/

Canadian Softwood Plywood:
https://richply.com/our-products/construction-sheathing/canadian-softwood-plywood-csp-csa-0151/

Marine Grade:
https://richply.com/our-products/sanded-industrial/marine-grade/

4. Comparison of the Four Manufacturers

The following table summarizes information explicitly available in the manufacturers’ published documentation.

ManufacturerCountryDocumented adhesive technologyProduct category
Columbia Forest ProductsUSA / CanadaSoy-based PureBond® assembly technologyDecorative hardwood plywood
States IndustriesUSANAUF/ULEF product options; construction-specific documentationHardwood plywood and panels
Mt. Baker ProductsUSASoy-based PlyClear® adhesiveCustom decorative hardwood plywood
Richmond PlywoodCanadaPhenol-formaldehyde resinStructural, industrial and other plywood

This comparison describes publicly documented products and technologies.

It does not establish that all four manufacturers have identical adhesive formulations, emission levels, product quality or regulatory status.

It is also not a ranking by production capacity, revenue, market share or product quality.

5. Differences Between Soy-Based and Phenol-Formaldehyde Adhesives

The manufacturers above illustrate two different approaches to adhesive selection.

Soy-Based Adhesives

Soy-based adhesive systems are used in certain decorative hardwood plywood manufacturing processes.

Columbia Forest Products and Mt. Baker Products publicly describe their respective soy-based adhesive technologies.

These systems are relevant to manufacturers producing decorative hardwood plywood for furniture, cabinets and interior applications.

The actual bonding performance must be evaluated using product-specific test results.

Phenol-Formaldehyde Adhesives

PF resin is widely used in plywood applications requiring durable and moisture-resistant bonding.

Richply identifies PF as the adhesive system used in its plywood production.

PF contains formaldehyde in its resin chemistry but is chemically different from UF resin.

Consequently, a plywood product manufactured with PF can be described as NAUF when it meets the applicable no-added-UF definition.

NAUF should not be interpreted as meaning that the product contains no formaldehyde or has zero formaldehyde emissions.

6. US Formaldehyde Regulations: EPA TSCA Title VI

The US Environmental Protection Agency regulates formaldehyde emissions from specified composite wood products under TSCA Title VI.

The regulated categories include:

  • Hardwood plywood with veneer core.
  • Hardwood plywood with composite core.
  • Medium-density fiberboard.
  • Thin medium-density fiberboard.
  • Particleboard.

The federal emission limits include:

Regulated productEmission limit
Hardwood plywood0.05 ppm
MDF0.11 ppm
Thin MDF0.13 ppm
Particleboard0.09 ppm

These limits are product-category-specific.

They should not be applied indiscriminately to all plywood products, including product categories outside the scope of the regulation.

NAF and ULEF Provisions

EPA regulations provide limited testing and certification exemptions for qualifying NAF-based and ULEF-based resin systems.

However, these exemptions are subject to specific requirements.

A manufacturer cannot automatically claim an exemption simply by describing a product as NAUF.

EPA also explains that certain PF-based laminated products may qualify for specific provisions relating to the definition of hardwood plywood, subject to the conditions in the regulations.

This is a different regulatory issue from the NAF/ULEF resin exemptions.

Buyers should verify the actual product category and applicable regulatory provision.

Official EPA references:

https://www.epa.gov/formaldehyde/formaldehyde-emission-standards-composite-wood-products
https://www.epa.gov/formaldehyde/frequent-questions-regulated-stakeholders-about-implementing-formaldehyde-standards

Federal regulation:
https://www.ecfr.gov/current/title-40/chapter-I/subchapter-R/part-770

7. Quality Inspection Requirements for NAUF Plywood

NAUF is an adhesive-related specification. It does not independently establish the overall quality of plywood.

A professional inspection should evaluate the following areas.

7.1 Adhesive Verification

Request:

  • Manufacturer’s adhesive declaration.
  • Product-specific adhesive information.
  • Relevant safety data sheet.
  • Product construction details.
  • Production-batch identification.

Verify whether the declaration applies to the complete panel or only to a particular bonding or lamination stage.

7.2 Formaldehyde Emission Testing

Request an appropriate test report when required by the product specification or applicable regulation.

Review:

  • Product identification.
  • Test method.
  • Laboratory identification.
  • Test date.
  • Measured result.
  • Applicable acceptance limit.
  • Scope of the test report.

A test report should not be assumed to cover unrelated product constructions.

7.3 Physical Appearance

Inspect:

  • Face and back veneer quality.
  • Surface sanding.
  • Open knots.
  • Splits and cracks.
  • Repairs and patches.
  • Core gaps.
  • Glue-line defects.
  • Edge condition.
  • Panel flatness.

7.4 Dimensional Inspection

Measure:

  • Length.
  • Width.
  • Thickness.
  • Thickness variation.
  • Squareness.
  • Edge straightness.

Acceptance criteria should be agreed upon in the purchase specification.

7.5 Bonding and Mechanical Performance

Depending on the intended application, consider:

  • Bond strength.
  • Wood failure percentage.
  • Delamination resistance.
  • Moisture resistance.
  • Bending strength.
  • Modulus of elasticity.
  • Screw-holding performance.

The appropriate test standards and acceptance criteria should be established according to the product category and intended use.

8. Questions Buyers Should Ask NAUF Plywood Manufacturers

Before placing an order, importers and distributors should confirm the following:

  1. Is the product manufactured without intentionally added UF resin?
  2. Which adhesive system is used?
  3. Does the declaration apply to the entire panel construction?
  4. Are different adhesive systems used in the core and face veneers?
  5. Is a product-specific SDS available?
  6. Is there a formaldehyde emission test report?
  7. What test method was used?
  8. What bonding classification does the product meet?
  9. What are the available panel thicknesses and dimensions?
  10. Is the product suitable for the intended application?
  11. What regulatory documentation is available for the destination market?
  12. Can the manufacturer provide batch traceability?

These questions help buyers distinguish between marketing terminology and verifiable technical product information.

9. Conclusion

North American plywood manufacturers use different adhesive technologies to manufacture products that meet particular market and application requirements.

Columbia Forest Products, States Industries, Mt. Baker Products and Richmond Plywood provide publicly documented examples of NAUF-related products and manufacturing approaches.

Their products are not identical.

Soy-based adhesive systems, alternative formaldehyde-free assembly technologies and phenol-formaldehyde resin systems have different chemical compositions and manufacturing characteristics.

For professional plywood buyers, the most reliable approach is to examine manufacturer-specific product documentation, adhesive declarations, testing results and applicable regulatory requirements.

NAUF should be treated as a precise adhesive specification, not as a universal guarantee of zero formaldehyde emissions, waterproof performance, structural quality or regulatory exemption.

Accurate technical documentation and independent product inspection remain essential for responsible plywood purchasing.


Official References

Manufacturer Sources

  1. Columbia Forest Products – PureBond® and Technical Documents
    https://www.columbiaforestproducts.com/
  2. States Industries – Environmental and Safety Data
    https://www.statesind.com/environmental-safety-data/
  3. Mt. Baker Products – Product Resources
    https://mtbakerproducts.com/product-resources/
  4. Richmond Plywood – Product FAQs and Technical Specifications
    https://richply.com/

Government and Regulatory Sources

  1. US Environmental Protection Agency – TSCA Title VI
    https://www.epa.gov/formaldehyde/formaldehyde-emission-standards-composite-wood-products
  2. US EPA – Regulatory Stakeholder FAQs
    https://www.epa.gov/formaldehyde/frequent-questions-regulated-stakeholders-about-implementing-formaldehyde-standards
  3. Electronic Code of Federal Regulations – 40 CFR Part 770
    https://www.ecfr.gov/current/title-40/chapter-I/subchapter-R/part-770

Editorial Disclaimer

This article is an independent technical and industry overview prepared using publicly available manufacturer documents and official government information.

Company names and product trademarks are used solely to identify the relevant manufacturers and their published products.

No commercial affiliation, sponsorship or endorsement is implied.

Product formulations, availability, certificates and regulatory status may change. Readers should obtain current product-specific documentation directly from manufacturers before making purchasing or compliance decisions.

Prepared for technical education and independent industry reference by PlywoodInspection.com.

REQUEST A TRIAL ORDER QUOTATION & SOURCING SUPPORT

Are you looking for plywood, wood-based panels, furniture, flooring, hardware, or other wood products for your business?

PlywoodInspection.com shares industry knowledge, manufacturing information, quality inspection references, supplier sourcing resources, and international wood products market insights.

We welcome inquiries from international importers, wholesalers, distributors, furniture manufacturers, contractors, and professional buyers interested in exploring sourcing opportunities.

HOW CAN WE ASSIST YOU?

  • Product Sourcing: Identifying potential manufacturers and suppliers of plywood, wood-based panels, furniture, flooring, and related products.
  • Supplier Evaluation: Reviewing available supplier information, manufacturing capabilities, and product specifications.
  • Factory Auditing: Discussing factory assessment and manufacturing process evaluation requirements.
  • Quality Inspection: Pre-production inspection, during-production inspection, final random inspection, and container loading supervision.
  • Product Testing: Discussing applicable laboratory testing requirements for wood-based panels and other wood products.
  • Trial Orders: Discussing product specifications, estimated quantities, pricing, samples, and potential trial order arrangements.

REQUEST YOUR QUOTATION

Please provide the following information:

  1. Product name and application
  2. Required specifications, thickness, and dimensions
  3. Preferred country of origin
  4. Estimated trial order quantity
  5. Destination country and discharge port
  6. Quality standards or inspection requirements

CONTACT US

Email: info@plywoodinspection.com

WeChat / WhatsApp: +86 180 8677 7869

Website: www.plywoodinspection.com

We welcome genuine business inquiries and opportunities for long-term cooperation.


Note: Product availability, supplier arrangements, inspection scope, testing services, prices, and order conditions are subject to individual evaluation and confirmation. This general inquiry invitation does not constitute a guarantee of product quality, supplier performance, or commercial outcomes.

Top Indonesia Blockboard and Plywood Manufacturer

About admin

Leave a Reply

Your email address will not be published. Required fields are marked *