100% BIRCH PLYWOOD MANUFACTURER

F17 FORMPLY TECHNICAL NOTE ,Formwork Plywood for Class 2 and Class 3 Surface Finishes to AS 3610,formwork plywood inspection,graders, AS 6669 Plywood sourcing service

This technical note has been developed in response to market problems and failures
relating to the quality of off form finishes being achieved from formwork plywood in the
Australian market.
Most issues relate to Class 2 surface finishes as defined in AS 3610, but issues do from time
to time occur in Class 3.
This Technical Note discusses some common formwork plywood problems and lists a
number of “good practices” required to reliably and consistently achieve a Class 2 or Class
3 surface finish.

The Formply Product
Formply is manufactured from wood veneers glued with synthetic adhesives and overlayed
with “phenolic impregnated papers”, also called phenolic surface films. The phenolic
surface film is often referred as “plastic face”.
The Australian Standard for formply is AS 6669 “Plywood Formwork”. This standard
specifies requirements for:

  • Quality of the outer surface i.e. Class 2, Class 3 etc.
  • Bond quality and durability
  • Thickness, length, width
  • Flatness at the time of manufacture
  • Stress grading and structural properties
  • Quality of the overlay
    o Water permeability
    o Bonding
    o Alkaline resistance
    Formply is usually sold on the basis of surface class, stress-grade and bond quality. For
    example “Class 2 F17 A Bond”.
    This indicates that the formwork plywood is intended to provide a Class 2 surface finish,
    has a stress-grade of F17 and has a Type A bond.
    AS 6669 permits three (3) bond types as follows:
  • A Bond – Durable for 50 years weather exposure

B Bond – Durable for 2-5 years weather exposure

  • C Bond – Durable for 1-2 years weather exposure
    Currently, all formply manufactured in Australia is Type A or Type B bond.
    Stress-grades range from F7 to F34. Stress grades F11, F14, F17, F22 and F27 are the most
    common.
    AS 6669 specifies four (4) surface qualities Class 2, Class 3, Class 4 and Class 5. These
    surface qualities are aligned with AS 3610.
    The most common surface classes from AS 6669 for formply manufactured in Australasia
    are:
  • Class 2
  • Class 3
  • Good 1 side – Class 2 one surface, Class 5 the alternate surface
    Normally only one (1) Class 2 pour can be reliably achieved per side due to exposure of the
    surface, wear and abuse on the jobsite. However, if protected and handled carefully, a
    number of Class 2 pours can often be achieved.
    Note that formply is not recommended for Class 1 surface finishes.

REQUEST A TRIAL ORDER QUOTATION & SOURCING SUPPORT

Are you looking for plywood, wood-based panels, furniture, flooring, hardware, or other wood products for your business?

PlywoodInspection.com shares industry knowledge, manufacturing information, quality inspection references, supplier sourcing resources, and international wood products market insights.

We welcome inquiries from international importers, wholesalers, distributors, furniture manufacturers, contractors, and professional buyers interested in exploring sourcing opportunities.

HOW CAN WE ASSIST YOU?

  • Product Sourcing: Identifying potential manufacturers and suppliers of plywood, wood-based panels, furniture, flooring, and related products.
  • Supplier Evaluation: Reviewing available supplier information, manufacturing capabilities, and product specifications.
  • Factory Auditing: Discussing factory assessment and manufacturing process evaluation requirements.
  • Quality Inspection: Pre-production inspection, during-production inspection, final random inspection, and container loading supervision.
  • Product Testing: Discussing applicable laboratory testing requirements for wood-based panels and other wood products.
  • Trial Orders: Discussing product specifications, estimated quantities, pricing, samples, and potential trial order arrangements.

REQUEST YOUR QUOTATION

Please provide the following information:

  1. Product name and application
  2. Required specifications, thickness, and dimensions
  3. Preferred country of origin
  4. Estimated trial order quantity
  5. Destination country and discharge port
  6. Quality standards or inspection requirements

CONTACT US

Email: info@plywoodinspection.com

WeChat / WhatsApp: +86 180 8677 7869

Website: www.plywoodinspection.com

We welcome genuine business inquiries and opportunities for long-term cooperation.


Note: Product availability, supplier arrangements, inspection scope, testing services, prices, and order conditions are subject to individual evaluation and confirmation. This general inquiry invitation does not constitute a guarantee of product quality, supplier performance, or commercial outcomes.

Top Indonesia Blockboard and Plywood Manufacturer

About admin

Check Also

Wood BASED PLYWOOD Core Options,Veneer,Hardwood Cross Band (HXB),Combination Fiber Core (CFC) ,articleboard,Medium Density Fiberboard (MDF),Lumber Core,Inspection checklist,Sourcing Specialist

VeneerConstructed using innerplies composed of western softwoods. Veneer core panels are lightweight, dimensionally stable and …

Leave a Reply

Your email address will not be published. Required fields are marked *