100% BIRCH PLYWOOD MANUFACTURER

Grain Raising or Surface Swelling,F17 FORMPLY TECHNICAL ,formwork plywood inspection,graders checklist, AS 6669 Plywood sourcing service,phenolic surface film Testing

Grain Raising or Surface Swelling
Grain raising is caused by moisture penetrating the phenolic surface film and causing
swelling of the surface veneer.
The causes of grain raising are:

  1. Severe weather exposure
  2. Failure to use release agent or form oil
  3. Damage to the phenolic surface film i.e. misuse of vibrators, handling damage
    etc.
  4. Faulty phenolic surface film
    As mentioned previously, the purpose of the phenolic surface film is to minimise moisture
    penetration of the surface veneer.
    Note that the phenolic surface film is not “water proof” and only slows the penetration of
    moisture to an extent that grain raising becomes manageable.
    The use of form oil and release agent is critical to prevent grain raising.
    No formply manufacturer guarantees a Class 2 surface finish where a release agent has
    not been used.
    The effectiveness of the phenolic surface film is greatly enhanced by the application of
    form oil.
    9
    An additional significant cause of grain raising is damage to the phenolic surface film
    through careless use of vibrators, handling on site and especially damage from handling of
    the steel work (See Plate 5).
    A damaged surface layer is an entry point for moisture and rapidly leads to severe grain
    raising. The use of a release agent immediately prior to pouring is effective in minimising
    moisture penetration by sealing scratches and damaged areas of the surface film.
    However, most grain raising is associated with weather exposure. In severe weather
    conditions, it is practically impossible to eliminate moisture penetration of the surface
    layer and some grain raising.
    In such weather conditions, tarping of the deck to fully protect against weather exposure is
    the only practical method to prevent both grain raising and distortion.
    PLATE THREE: Grain Raising of the surface veneer due to weather exposure
    1
    0
    PLATE FOUR: Grain Imprint on concrete surface
    PLATE 5: Grain Imprint associated with moisture penetration at vibrator Burn
    Note: Where grain raising is observed, a release agent has been used and the deck has not
    been exposed to severe weather, the formply manufacturer should be contacted.

REQUEST A TRIAL ORDER QUOTATION & SOURCING SUPPORT

Are you looking for plywood, wood-based panels, furniture, flooring, hardware, or other wood products for your business?

PlywoodInspection.com shares industry knowledge, manufacturing information, quality inspection references, supplier sourcing resources, and international wood products market insights.

We welcome inquiries from international importers, wholesalers, distributors, furniture manufacturers, contractors, and professional buyers interested in exploring sourcing opportunities.

HOW CAN WE ASSIST YOU?

  • Product Sourcing: Identifying potential manufacturers and suppliers of plywood, wood-based panels, furniture, flooring, and related products.
  • Supplier Evaluation: Reviewing available supplier information, manufacturing capabilities, and product specifications.
  • Factory Auditing: Discussing factory assessment and manufacturing process evaluation requirements.
  • Quality Inspection: Pre-production inspection, during-production inspection, final random inspection, and container loading supervision.
  • Product Testing: Discussing applicable laboratory testing requirements for wood-based panels and other wood products.
  • Trial Orders: Discussing product specifications, estimated quantities, pricing, samples, and potential trial order arrangements.

REQUEST YOUR QUOTATION

Please provide the following information:

  1. Product name and application
  2. Required specifications, thickness, and dimensions
  3. Preferred country of origin
  4. Estimated trial order quantity
  5. Destination country and discharge port
  6. Quality standards or inspection requirements

CONTACT US

Email: info@plywoodinspection.com

WeChat / WhatsApp: +86 180 8677 7869

Website: www.plywoodinspection.com

We welcome genuine business inquiries and opportunities for long-term cooperation.


Note: Product availability, supplier arrangements, inspection scope, testing services, prices, and order conditions are subject to individual evaluation and confirmation. This general inquiry invitation does not constitute a guarantee of product quality, supplier performance, or commercial outcomes.

Top Indonesia Blockboard and Plywood Manufacturer

About admin

Check Also

Wood BASED PLYWOOD Core Options,Veneer,Hardwood Cross Band (HXB),Combination Fiber Core (CFC) ,articleboard,Medium Density Fiberboard (MDF),Lumber Core,Inspection checklist,Sourcing Specialist

VeneerConstructed using innerplies composed of western softwoods. Veneer core panels are lightweight, dimensionally stable and …

Leave a Reply

Your email address will not be published. Required fields are marked *