Masonry Layout

Identify quality problems in final cut wood boards Modern sawmills or lumber mills are computer-controlled enterprises that process raw logs into millions of board feet of lumber per day. After initial cutting and trimming, wood is kiln or air dried, then planed and cut to final dimensions. Wood is precisely graded for quality. The number and location of defects, whether …

We are specialised in the universal application for narrow surfaces. Typical production defects such as bumps or dents are precisely detected and the drilling pattern is monitored for uniformity on the coated and painted narrow sides of furniture components.

Our Furniture QC systems detect any damage, decor defects, and dimensional deviations on one side or both sides during the front panel and carcass production, with maximum speed and precision. http://www.furniturecabinetsdepot.com/

Our Flooring inspectors combine the surface and the edge inspection and are installed in any flooring productions, for laminate or LVT flooring or digitally printed surfaces for a wide variety of decors and structures. Optimized scanner modules ensure the best detection performance for each product. Our QC systems continuously monitor the quality of products and trigger alarms when defects are …

We are specialized in the safe detection of all defects on the raw board, before or after cutting and sanding, with the classification of defects based on their cause in the process. Our team are good at detecting any damage on the top and bottom of panels in short-cycle press lines reliably detect heat streaks, resin spots, duplicate imprints or …

Veneer Cutting Methods Rotary Cut Veneers are peeled from a log like paper coming off a roll. This method produces large pieces of veneer with flat, random grain patterns. This is generally the least expensive cutting method, but rotary veneers can have a bland appearance and may vary widely in pattern or color. Ideal for: Projects where a low price …

LINDA CUI, 32 years old, is a FILM FACED PLYWOOD quality inspector of Pizhou quality inspection team. Since she has been engaged in quality inspection, she has always put the interests of plywood and MDF as well as furniture customers first. She not only regards plywood, MDF and furniture customers as service objects, but also regards plywood, MDF and furniture …

2023 Special Topic :Formulate a complaint “two lines” to fully protect the rights and interests of plywood and MDF customers. “Plywood and MDF customer complaints can reflect the deficiencies of plywood and MDF suppliers and quality inspection teams. In order to improve the customer satisfaction of plywood and MDF, I think this is the significance of my work.” During the …

Five batches of solid wood composite flooring products were randomly inspected this time. After inspection, five batches were all qualified, with a qualification rate of 100%. According to the requirements of GB/T 18103-2013 Solid Wood Composite Flooring and GB 18580-2017 Limit of Formaldehyde Release in Wood-based Panels and Products for Interior Decoration and Decoration Materials, this spot check inspected 8 …

Three batches of wood-based panel products are sampled and inspected, all of which are qualified, and the qualification rate is 100%. The quality supervision and random inspection of wood-based panel products are mainly based on the following standards: GB/T 17656-2018 Plywood for Concrete Formwork, GB/T 20240-2017 Bamboo Laminate Flooring, and GB/T 5849-2016 Blockboard. The moisture content, static bending strength, dip …