100% BIRCH PLYWOOD MANUFACTURER

CHINA MDO PAINT GRADE ONE SIDE OVERLAY PANEL overlay with 235g/m2 ,FACTORY AUDITING,INSPECTION,TESTING,SOURCING

MDO PAINT GRADE ONE SIDE

OVERLAY PANEL

Panel overlaid on main face with MDO overlay with 235g/m2 only one face.

General Specifications

  • Excellent use for marking highway signs easy to install and weather resistant.
  • Its main face is overlaid with MDO 235 g/m2 and back face without paper.
  • Its smooth surface is obtained for a process of “two step” process, first a good sanding of the plywood and followed by applying the overlay.
  • High strength, light weight.
  • 27% phenolic resin in MDO.

Products, Features and Applications

  • Avoid extreme temperatures and moisture.
  • Always clean and dry the surface before painting.
  • No other surface preparation is needed.
  • The paint priming coat is the most important hence, do not apply too thin of a priming coat. Oil/alkyd primers are recommended; latex primers also work well.
  • It is also recommended to seal the edge for an adequate protection against moisture penetration.

Size

Thickness​:

​

  • 9 mm = 11 / 32”
  • 12 mm = 15 / 32”
  • 15 mm = 19 / 32”
  • 18 mm = 23 / 32”

​

Dimensions:

​

  • Width 1,220 m = 4′
  • Length 2,440 m = 8′
Top Indonesia Blockboard and Plywood Manufacturer

About admin

Check Also

Quality Targets and Control Points for Building Cyclostyle Base Paper

With the development of construction, there are three main product types of building formwork: architectural …

Leave a Reply

Your email address will not be published. Required fields are marked *