100% BIRCH PLYWOOD MANUFACTURER

CHINA MDO PAINT GRADE TWO SIDE OVERLAY PANEL MDO of 235 g/m2 ,FACTORY AUDITING,INSPECTION,TESTING,SOURCING

Panel overlaid with faces MDO with 235 g/m2 both faces.

General Specifications

  • Excellent use for marking highway signs easy to install and weather resistant.
  • Both faces are overlaid with MDO of 235 g/m2.
  • Its smooth surface is obtained for a process of “two step” , first a good sanding of the plywood and then the overlay is applied.
  • High strength, light weight.
  • 27% phenolic resin in MD0.

Size

Products, Features and Applications

  • Avoid extreme temperatures and moisture.
  • Always clean and dry the surface before painting.
  • The paint priming coat is the most important hence, do not apply too thin of a priming coat. Oil/alkyd primers are recommended; latex primers also work well.
  • No other surface preparation is needed.
  • It is also recommended to seal the edge for an adequate protection against moisture penetration.

Thickness​:

​

  • 9 mm = 11 / 32”
  • 12 mm = 15 / 32”
  • 15 mm = 19 / 32”
  • 18 mm = 23 / 32”

​

Dimensions:

​

  • Width 1,220 m = 4′
  • Length 2,440 m = 8′
Top Indonesia Blockboard and Plywood Manufacturer

About admin

Check Also

Quality Targets and Control Points for Building Cyclostyle Base Paper

With the development of construction, there are three main product types of building formwork: architectural …

Leave a Reply

Your email address will not be published. Required fields are marked *