Masonry Layout

Improve quality and decrease wood inspection costs with advanced machine visionInspecting wood and wooden elements is a difficult task when done manually. Wood is organic and all items are basically unique. This results in high costs and variations in the inspection results. Manual inspection of aesthetic qualities on products in the wood industry will typically capture about 70-80 percent of …

How materials are utilised, the speed of production and the quality realised greatly influence the yields achieved in wood processing. The employment of automatic visual-inspection systems makes it possible to speed up production processes and increase qualities. Information of the individual, modular inspection systems can be found here: Optimat Basic SystemOptimat Healthy KnotsOptimat ProfileScanOptimat SoftwareOptimat Both-Sides OPTIMAT C+ guarantees maximum …

Automatically inspects profile and surfaces of boards and complex contoured wood products for an extensive range of defects and attributes. FyrEye-2710 systems inspect and measure profiles of linear wood products, such as: moldings, dimension lumber, flooring and tongue-and-groove products in low, medium and high speed linear production processes. Inspections identify, measure and apply the customer’s pass / fail criteria to …

In conjunction with an AOD1 evaluation unit, two OD Mini Pro displacement measurement sensors measure the thickness of the veneer with a high level of precision. The thickness of the veneer is simultaneously measured at several different points through the cascading arrangement of up to 8 AOD1 evaluation units, each with two displacement measurement sensors, and the corresponding data is …

The MLG-2 WebChecker automation light grid is the cost-efficient solution for inspecting the veneer surface. Using hole detection software, cracks and holes are reliably detected in the veneer. Thanks to the cross beam function on the automation light grid, both position and width can be determined with millimeter precision and the edge of the veneer can be regulated.

Identify quality problems in final cut wood boards Modern sawmills or lumber mills are computer-controlled enterprises that process raw logs into millions of board feet of lumber per day. After initial cutting and trimming, wood is kiln or air dried, then planed and cut to final dimensions. Wood is precisely graded for quality. The number and location of defects, whether …

We are specialised in the universal application for narrow surfaces. Typical production defects such as bumps or dents are precisely detected and the drilling pattern is monitored for uniformity on the coated and painted narrow sides of furniture components.

Our Furniture QC systems detect any damage, decor defects, and dimensional deviations on one side or both sides during the front panel and carcass production, with maximum speed and precision. http://www.furniturecabinetsdepot.com/

Our Flooring inspectors combine the surface and the edge inspection and are installed in any flooring productions, for laminate or LVT flooring or digitally printed surfaces for a wide variety of decors and structures. Optimized scanner modules ensure the best detection performance for each product. Our QC systems continuously monitor the quality of products and trigger alarms when defects are …

We are specialized in the safe detection of all defects on the raw board, before or after cutting and sanding, with the classification of defects based on their cause in the process. Our team are good at detecting any damage on the top and bottom of panels in short-cycle press lines reliably detect heat streaks, resin spots, duplicate imprints or …