Guangzhou Enterprises Confirmed by “Formaldehyde-free Wood-based Panels  Products” Green Forest Certification Co., Ltd. authorized by the Certification Management Committee of China Forestry Industry Association has certified and audited the following enterprises in accordance with the requirements of “Group Standards for Formaldehyde-free Wood-based Panels and Their Products”, and has passed the …

Zuogezhuang, Is the Largest door skin plywood production in China . The door skin plywood from zuogezhuang is cheaper but quality is good ,compared with linyi ,they mostly used poplar back and red hardwood face especially okoume face .The sizes are avrious .

Zuogezhuang, an unknown town, is the base of plywood production in China. In an unknown town like Zuogezhuang Town, Wen’an County, Langfang City, Hebei Province, the roads are crowded with vehicles every day. People say “people in Zuogezhuang, but cars like driving in Beijing”! Because here is the plywood production …

The joy of the Spring Festival brings more diligence to the plywood workers. They seem to integrate into the production of plywood faster than in previous years, but for plywood quality control personnel, even so, most workers can easily return to the level of proficiency before the Spring Festival, but …

Due to the continuous fog, the moisture in the air is relatively large. After quality inspection, the finished plywood products should be covered with waterproof plastic film in time to prevent the surface or edge of the plywood from absorbing excessive moisture, making the board warped or mildewed. Daily work …

Freezing weather environment plywood Quality Control When inspect the plywood in Freezing weather environment  ,check the thickness and moisture content first ,Many factories use hot steam to heat the hot press, but in the cold environment, the temperature is slightly changed. Generally, factories take to prolong the hot pressing time, some …

beaded plywood grading system and QC checklist Before inspect the beaded panels ,first should know the difference between regular plywood and beaded panels,Tongue-and-groove-look plywood .] Beaded groove pattern creates the character and unique appearance of tongue and groove construction. Beaded Panels can be used for wall paneling, wainscoting, cabinet doors and …

1. Fancy veneers are sliced and peeled on-site to ensure stringent control of grade, quality and thickness. 2. Face veneers are sliced at 0.5mm+. Thin faced panels are also available through vendors specializing in this process. 3. Fancy veneers are conditioned by precision calibrated dryers to provide faces with a …

Core veneers originate with small independent suppliers where they undergo initial quality inspections. Veneers are conditioned by machine dryers to produce a core with a consistent moisture content (MC) ideal for lay-up, avoiding potential warp and instability within the platform. Core veneers then undergo a second more rigorous inspection for …

Utility (UTY) – There is some minor defect allowed on the face such as end splits, knots and discoloration. But they must be skillfully repaired by putty. No uneven core thickness is allowed. Some core void, core lap and end splits are allowed but end splits are not shown on …