Exterior plywood coated with melamine film is made by pressing paper saturated with melamine resin on a surface of exterior plywood. The surface coated with the film improves their resistance to abrasion and protects the sheets from moisture. Melamine coated plywood can be produced with wiremesh finishing. Basic information about product Plywood is composed from thin layers of wood veneer …
Read More »TimeLine Layout
October, 2024
-
12 October
Flame retardant plywood, coated with phenol film Bfl-s1,Inspection,Testing,Quality Control
Description It is a plywood, coated phenol film with an increased reaction to fire class Bfl-s1. It is intended for use in outdoor conditions (according to PN-EN 636), meets the requirements of bonding quality class 3 according to PN-EN 314-2. These boards show increased properties (resistance to weather conditions, surface abrasion) and are intended for use in construction, for flooring. …
Read More » -
12 October
Flame retardant birch plywood B-s1, d0 Inspection,Testing,Quality Control
Description It is a plywood made of birch wood veneers with increased fire resistance. Intended for use in exterior conditions (according to PN-EN 636), meets the requirements of bonding quality class 3 according to PN-EN 314-2. The product has been classified in the reaction to fire class B-s1, d0 according to PN-EN 13501-1. Basic data Types of plywood depending on …
Read More » -
12 October
Plywood with “tongue and groove” and “scarf-joint” Inspection,testing,QC Report
Description This is the plywood with milled edges allowing to combine them using tongue-and-groove or scarf-joint edge joining. It enables faster and more accurate assembly of sheets into a large segments creating flat working surface. It is mainly used in structures such as floors, walls, roofs and semi-trailers.
Read More » -
12 October
Plywood slats Inspection,TESTING,Quality Control
Description Plywood strips are produced from deciduous plywood (birch, alder, beech) of special structure where fibres in most of veneer sheets are parallel in relation to their length, while two or four veneer plies have cross-wise arrangement of fibre for stabilisation. They are produced on the base of urea-formaldehyde resin, for use in dry conditions (according to PN-EN 636), meeting …
Read More » -
12 October
Plywood with aluminium insert Inspection,testing,quality Control
Description A wood-based board, produced on the basis of phenol-formaldehyde resin as water resistant, for use in exterior conditions (according to PN-EN 636), meeting the requirements of 3 gluing class quality according to PN-EN 314-2, composed of glued plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°. The aluminium core …
Read More » -
12 October
Coniferous plywood impregnated by wood preservative agent Inspection,Testing,Quality Control
Description It is a pine or combined pine plywood impregnated by dipping by wood preservatives agent. This product protects the plywood surface against wood destroying and wood discolouring fungi and satisfies the performance requirements of EN 599-1. Treated parts must always be protected with a topcoat treatment before they are exposed to the influence of the weather. Upon customer request …
Read More » -
12 October
Plywood with melamine film Inspection,testing,quality control
Description A plywood foliated with a melamine film is wood-based board composed of glued with phenol-formaldehyde resin, or other of similar properties, plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°. There are various types of plywood by wood species: Birch – birch plywood 100% Beech – beech plywood 100% Birch, alder, …
Read More » -
12 October
Plywood with phenolic film inspection checklist,QC report,Testing
Description A plywood foliated with a phenol film is wood-based board of improved properties (resistance to water, sanding through) composed of glued plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°. There are various types of plywood by wood species: Birch – birch plywood 100% Beech – beech plywood 100% …
Read More » -
12 October
Plywood for laser cutting,inspection checklist,testing,qc report
Description A wood-based board composed of glued plies of wood (outer and middle veneers), whereat the directions of fibre of adjacent plies are staggered by 90°, and all plies (outer and middle veneers) are made of birch. Plywood with highly improved build quality, without any openings of veneers, splits, black and loose knots, knot holes both on the surface and …
Read More »