WARDROBE QUALITY INSPECTION REPORT,Vietnam,INDONESIA,Malaysia,China,Thailand,Cambodia
admin
Quality Control Inspection and Assurance
107 Views
WARDROBE QUALITY INSPECTION REPORT
1. Basic Information
| Item | Details |
|---|
| Product Name | Wardrobe (Closet/Cabinet) |
| Inspection Date | [Date] |
| Inspection Standard | ANSI/BIFMA, EN 14749, GB/T 3324-2017 |
| Sample Size | [X units] |
2. Materials & Required Certifications
| Material | Certification/Test Standard | Remarks |
|---|
| Particleboard (PB) | CARB P2, E1/E0 (Formaldehyde Emission) | Must meet EPA TSCA Title VI |
| MDF (Medium Density Fiberboard) | FSC, PEFC (Sustainable Forestry) | Low formaldehyde (<0.1 ppm) |
| Solid Wood (Oak, Pine, etc.) | FSC, Lacey Act Compliance | No cracks, warping |
| PVC/ABS Edge Banding | REACH, RoHS (Heavy Metals) | Smooth, no peeling |
| Hardware (Hinges, Rails) | BIFMA X5.1, EN 15570 (Durability) | Salt spray test passed |
| Paint/Coating | ASTM D4236 (Lead-Free), Greenguard Gold | No bubbles, peeling |
3. Common Defects (Visual & Processing)
| Defect Type | Description | Acceptance Criteria |
|---|
| Surface Scratches | Visible marks on panels | None allowed |
| Edge Chipping | Damaged edges (PVC/wood) | ≤1 mm tolerance |
| Poor Paint Adhesion | Peeling or uneven coating | 100% adherence |
| Joint Gaps | Misaligned doors/drawers | ≤2 mm gap tolerance |
| Hardware Misalignment | Loose hinges/sliding rails | Smooth operation |
| Warping | Bent panels (>3 mm deviation) | Flat within ±2 mm/m |
4. Laboratory Performance Tests
| Test Item | Test Standard | Requirement | Test Result |
|---|
| Load Capacity (Shelves) | EN 14749:2016 | ≥50 kg static load | Pass/Fail |
| Drawer Durability | BIFMA X5.1 (20,000 cycles) | No deformation | Pass/Fail |
| Formaldehyde Emission | ASTM E1333, EN 717-1 | ≤0.05 ppm (E0 Grade) | [Value] ppm |
| Stability Test | ANSI/BIFMA (Tip-Over) | No tipping at 20° tilt | Pass/Fail |
| Hardware Corrosion | ASTM B117 (Salt Spray) | No rust after 24 hrs | Pass/Fail |
| Fire Resistance | BS 476-6 (Surface Spread) | Class 1 Rating | Pass/Fail |
5. Production Processes
| Process | Key Steps | Quality Control Checkpoints |
|---|
| Material Cutting | CNC precision cutting | Dimensions (±0.5 mm tolerance) |
| Edge Banding | PVC/ABS thermal bonding | No gaps, bubbles, or peeling |
| Assembly | Cam-lock fittings + screw reinforcement | Joint tightness check |
| Surface Finishing | Spray painting/lamination | Even coating, no dust particles |
| Hardware Installation | Hinges, rails, handles | Smooth operation, no wobbling |
| Packaging | Corner protectors, moisture-proof wrap | No scratches during transit |
Notes:
- Certifications: Supplier must provide valid test reports (SGS, Intertek, etc.).
- Defects: Critical defects (e.g., structural instability) result in batch rejection.
- Test Frequency: Random sampling per AQL 2.5 (ISO 2859-1).
