Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Analysis of the EU’s Anti-Dumping Investigation on Chinese Plywood 1. Likelihood of Anti-Dumping Duties Being Imposed The EU’s preliminary ruling on anti-dumping duties against Chinese plywood is expected on May 9, 2025. Based on historical EU trade defense measures, the probability breakdown is: Probability of Duties Being Imposed: ~30-70% The EU has frequently imposed anti-dumping duties on Chinese products (e.g., …
Analysis of the EU’s Anti-Dumping Investigation on Chinese Plywood 1. Likelihood of the Anti-Dumping Duties Being Imposed The European Commission (EC) will announce its preliminary findings on May 9, 2025, regarding whether Chinese film-faced plywood is being dumped in the EU market (i.e., sold below fair market value). Several factors will influence the decision: Dumping Margin Calculation: If the EC …
𝗨𝗽𝗰𝗼𝗺𝗶𝗻𝗴 𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗗𝗮𝘁𝗲 – 𝘁𝗵𝗲 𝗖𝗵𝗶𝗻𝗲𝘀𝗲 𝗛𝗮𝗿𝗱𝘄𝗼𝗼𝗱 𝗣𝗹𝘆𝘄𝗼𝗼𝗱 𝗔𝗻𝘁𝗶-𝗱𝘂𝗺𝗽𝗶𝗻𝗴 𝗖𝗮𝘀𝗲Please mark your calendars for May 9. On that day, the EU Commission will announce its plans regarding provisional duties. Interested parties will have 3 working days to submit written comments on the accuracy of the calculations.Stay informed and follow us for more updates on the AD cases.
Quality Inspection Report for Carpet Gripper (Wooden Type) Product Name: Wooden Carpet GripperProduction Country: VietnamDestination Market: United States 1. Product Classification Carpet grippers can be classified based on material, application, and design. This report focuses on wooden carpet grippers, which are commonly used for securing carpets to floors. 1.1 Types of Wooden Carpet Grippers: Standard Wooden Gripper Rods (Straight strips …
Quality Inspection Report for Vietnamese Cabinet HardwareInspection Date: April 6, 2025Factory: A well-known cabinet hardware manufacturer in VietnamDestination Market: United StatesQuantity Inspected: 3 containers 1. Inspection Scope This report covers the quality inspection of cabinet hardware produced in Vietnam, intended for export to the U.S. market. The inspection was conducted on-site at the factory, following industry standards and customer requirements. 2. Common Cabinet Hardware …
Quality Control Report on Melamine Plywood: Direct Pressing vs. Laminated Pressing 1. Introduction Melamine plywood, commonly referred to as melamine-faced plywood (MFP), is widely used in furniture manufacturing, interior decoration, and construction due to its durability, aesthetic appeal, and cost-effectiveness. The production process of melamine plywood primarily involves two methods: Direct Pressing (Direct Lamination) and Laminated Pressing (Indirect Lamination). Each …
Quality Control Report for Melamine Plywood Production 1. Introduction Melamine plywood, commonly referred to as MELAMINE PLYWOOD, is a high-performance engineered wood product widely used in furniture, cabinetry, and interior decoration due to its durability, aesthetic appeal, and resistance to moisture and abrasion. The manufacturing process of melamine plywood involves two primary techniques: Direct Pressing (直贴) and Indirect Pressing (复贴). Each method has distinct …
Quality Control Inspection Report for Oversized and Non-Standard Dimension Plywood 1. Introduction Plywood is a versatile engineered wood product widely used in construction, furniture manufacturing, and industrial applications. While standard-sized plywood (e.g., 1220 × 2440 mm) follows well-established production and quality control protocols, oversized and non-standard dimension plywood (e.g., 1525 × 3050 mm, 2000 × 6000 mm) presents unique challenges in manufacturing …
Comparative Quality Control Report on Furniture Hardware from Vietnam and China Introduction Our QC team conducts annual inspections for over 100 containers of various types of furniture hardware, ensuring compliance with international standards for markets such as the USA, Canada, and Australia. This report provides a detailed comparison between furniture hardware produced in Vietnam and China, covering production processes, material …
Quality Inspection Report: Comparative Analysis of Flooring Products Manufactured in Vietnam and China IntroductionOur QC team conducts rigorous inspections on over 300 containers of various flooring types annually, providing deep insights into the production processes, material differences, quality standards, and common defects in Vietnamese and Chinese flooring products. This report compares the manufacturing processes, raw materials, quality issues, and laboratory …
