Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.
Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.
All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.
The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.
As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.
Specification
according to TU 5512-002-44769167-98
Dimensions, mm2440 х 1220, 1220 x 2440, 2500 х 1250, 1250 x 2500Thickness, mm6.5, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 27.0, 30.0Tolerance on length (width)+/- 2mmGrade of face veneer1, 1/2, 2Number of pliesfrom 5 up to 21 depending on thicknessSurface colorin assortmentEdges processingby waterproof acrylic paintBasisbirch plywoodFormaldehyde emission classE1 (up to 8 mg per 100g of bone dry plywood)Water resistanceWBP markMoisture content, max5-12 %Ultimate shearing strengthnot less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)Ultimate tensile strengthnot less 40 MPaUltimate creasing strengthnot less 60 MPaCertificationDIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST
Quality Inspection Report: Comparative Analysis of Birch Plywood (Raw & UV) Produced in Vietnam vs. China Introduction Our QC team conducts over 500 container inspections annually for birch plywood (both raw and UV-coated) manufactured in Vietnam and China. This report provides a detailed comparison of production processes, raw material differences, common defects, laboratory test results, and final product quality. The …
Quality Inspection Report: Comparative Analysis of Cabinets and Vanities Produced in Vietnam and China IntroductionOur QC team conducts rigorous inspections for over 500 containers of cabinets and vanities annually, ensuring compliance with international standards for markets such as the USA, Canada, and Australia. This report provides a detailed comparison of production processes, material differences, common defects, and laboratory test results …
Quality Inspection Report: Comparative Analysis of MDF and Pine Wood Mouldings Produced in Vietnam and China Introduction Our QC team has conducted extensive quality inspections on over 400 containers of MDF (Medium-Density Fiberboard) and pine wood mouldings annually, providing valuable insights into the production processes, material differences, common defects, and laboratory test results for products manufactured in Vietnam and China. …
After 300 CONTAINERS inspection yearly ,our qc team shared their inspection experience below :PVC foam board is a versatile material widely used in construction, advertising, and interior design due to its lightweight, durability, and ease of fabrication. This report compares the production processes, material compositions, common defects, and laboratory test results of PVC foam boards manufactured in Vietnam and China. …
In recent months, particularly during April and May, northern regions such as Linyi, Xuzhou, and Henan have experienced seasonal high temperatures accompanied by the widespread presence of willow and poplar fluff. This weather has significantly impacted the bonding performance of Film Faced Plywood (FFP). The rising temperatures have caused delays in pre-pressing and hot-pressing processes in some plywood factories, leading to …
In recent years, the northern regions of China, including Linyi, Xuzhou, and Henan, have experienced significant seasonal challenges during April and May due to rising temperatures and the widespread presence of poplar and willow cotton. These environmental factors have severely affected the production quality of Green Plastic PP Faced Plywood, particularly in terms of bonding performance. During this period, the accelerated …
In recent months, the northern regions of China, including Linyi, Xuzhou, and Henan, have experienced a significant increase in poplar and willow catkins (commonly known as “cotton fluff”) during April and May, accompanied by unusually high temperatures. This seasonal phenomenon has posed serious challenges to the production of film faced plywood, particularly affecting adhesive performance and overall product quality. During …
Quality Control Inspection Report for SPC Flooring in Hanoi, Vietnam Inspection Date: March 6, 2025Location: Hanoi, VietnamProduct: SPC (Stone Plastic Composite) FlooringClient: A U.S.-based SPC Flooring Importer (Name withheld per confidentiality agreement) 1. Introduction Our professional quality control (QC) team was commissioned by a U.S. importer to conduct a thorough inspection of SPC flooring at a manufacturing facility in Hanoi, …
Quality Inspection Report for Kitchen Cabinets and Wardrobes in MalaysiaInspection Date: March 28, 2025 IntroductionOur professional quality control (QC) team was commissioned by a U.S.-based importer of kitchen cabinets and wardrobes to conduct a thorough inspection of their orders at manufacturing facilities in Malaysia. The objective was to ensure that the products met the stringent quality standards specified by the …
Quality Inspection Report for PVC Foam Board in Ningbo, ZhejiangDate of Inspection: April 6, 2025 1. IntroductionOur professional quality control (QC) team was commissioned by an importer of PVC foam sheets based in Puerto Rico to conduct a thorough inspection of their PVC foam board order at a mouldings factory in Ningbo, Zhejiang. The purpose of this inspection was to …
