Quality Inspection Report Product: Green Plastic Polypropylene (PP) Film Faced PlywoodInspection Date: [Insert Date]Inspector: [Inspector Name]Batch No.: [Batch Number] 1. Common Processing Defects in Film Faced Plywood Defect TypeDescriptionAcceptance CriteriaDelaminationSeparation between veneer layers due to poor adhesive bonding.No visible delaminationBubbles/WrinklesAir trapped under PP film or uneven film application.Smooth, bubble-free surfaceScratches/CutsSurface damage due to improper handling or machining.No deep scratches (>0.2mm)Edge SplittingCracks or splits at …

QUALITY INSPECTION REPORT Product: Green Plastic PP Film Faced PlywoodStandard: EN 314-2, BS 6566, ASTM D1037 Test ItemStandard RequirementTest ResultPass/FailRemarks1. Visual DefectsFilm PeelingNo peelingNonePass–Surface Scratches≤2mm depth, ≤5cm length1.5mm, 3cmPassMinor defectEdge Chipping≤3mm2mmPass–Glue SpotsNot allowedNonePass–Bubbles (≥5mm)≤3 spots/m²1 spot/m²Pass–2. Dimensions & ToleranceThickness (18mm)±0.5mm18.2mmPass–Length & Width Tolerance±3mm+2mmPass–Flatness≤2mm/m1.5mm/mPass–3. Physical PropertiesMoisture Content (%)6-14%9.5%Pass–Density (kg/m³)≥600650Pass–4. Mechanical TestsBending Strength (MPa)≥3035Pass–Modulus of Elasticity (MPa)≥40004500Pass–Glue Shear Strength (MPa)≥1.01.3Pass–5. Film Adhesion TestPeel Strength …

UV PREFINISHED FANCY PLYWOOD QUALITY INSPECTION REPORT [Header Section] Product Name: UV Prefinished Fancy Plywood Client: [Client Name] Order No.: [Number] Production Date: [DD/MM/YYYY] Inspection Date: [DD/MM/YYYY] Inspector: [Name] Batch No.: [Number] [Defects & Test Results Table] | No. | Inspection Item | Standard Requirement | Test Method | Defect Type | Test Result | Pass/Fail | Remarks | |-----|--------------------------|---------------------------------|------------------------|----------------------------|-------------|-----------|---------| …