Plywood T&G (Tongue & Groove) Quality Inspection Report (Including Plastic Tongue Inspection) 1. General Information Inspection ItemDetailsProduct NameT&G Plywood with Plastic TongueGrade[Specify: MR, BWR, BWP, etc.]Thickness[e.g., 12mm, 18mm]Size (L x W)[e.g., 2440mm x 1220mm]Standard ReferenceEN 314-2, BS 6566, JAS 233, etc.Inspection Date[DD/MM/YYYY] 2. Common Processing Defects in T&G Plywood Defect TypeDescriptionAcceptance CriteriaRemarksMisaligned Tongue & GrooveImproper fitting due to machining errorMust …

Quality Inspection Report Product Name: Beaded Paintable White Primed MDF Wall PanelsInspection Date: [Insert Date]Batch No.: [Insert Batch No.]Manufacturer: [Insert Manufacturer]Inspector: [Inspector Name] 1. Common Manufacturing Defects Checklist Defect TypeDescriptionAcceptance CriteriaInspection Result (Pass/Fail)RemarksSurface ImperfectionsScratches, dents, or uneven texture on the primed surface.Smooth, defect-freePass/Fail[Notes]Edge ChippingDamaged or rough edges along the beaded design.Clean, sharp edgesPass/Fail[Notes]Primer AdhesionPoor primer coating leading to peeling or flaking.Even, well-bonded primerPass/Fail[Notes]Warping/BowingPanel deformation (curving …

HPL & MELAMINE PLYWOOD QUALITY INSPECTION REPORT [TABLE HEADER] Date of Inspection: [DD/MM/YYYY] Inspector: [Name] Batch No.: [Number] Supplier: [Name] Manufacturing Date: [DD/MM/YYYY] [MAIN TABLE] | Category | Test Item | Standard Requirement | Test Method | Test Result | Pass/Fail | Remarks | |------------------------|----------------------------|-----------------------|----------------------|-------------|-----------|---------| | **HPL Plywood Defects** | | | | | | | | | Delamination | …

PINE PLYWOOD QUALITY INSPECTION REPORT Test CategoryTest ItemStandard RequirementTest ResultPass/FailDefect DescriptionVisual DefectsKnotsMax 3 per m²2/m²PassSmall tight knots allowedSplits/CracksNone allowedNonePass–Core GapsMax 2mm width1.5mmPassOccasional small gapsFace Veneer QualityNo open defectsMinor tearoutConditionalSanding requiredDelaminationNone allowedNonePass–Dimensional ChecksThickness Tolerance±0.3mm+0.2mmPassUniform thicknessLength/Width Tolerance±3mm+2mmPassWithin specSquareness≤2mm deviation1.5mmPass–Physical TestsMoisture Content8-12%10.2%PassProperly driedDensity500-600kg/m³540kg/m³Pass–Bending Strength (MOR)≥30MPa34MPaPassExcellent stiffnessModulus of Elasticity (MOE)4500MPa4800MPaPass–Adhesion TestsGlue Bond Strength≥1.2N/mm²1.5N/mm²PassExcellent bondingBoil Test (24hr)No delaminationPassedPassWater-resistant glueSurface QualityRoughness (Ra)≤50μm42μmPassSmooth surfaceSanding DefectsNo unsanded areasMinor …

Quality Inspection Report Product: Green Plastic Polypropylene (PP) Film Faced PlywoodInspection Date: [Insert Date]Inspector: [Inspector Name]Batch No.: [Batch Number] 1. Common Processing Defects in Film Faced Plywood Defect TypeDescriptionAcceptance CriteriaDelaminationSeparation between veneer layers due to poor adhesive bonding.No visible delaminationBubbles/WrinklesAir trapped under PP film or uneven film application.Smooth, bubble-free surfaceScratches/CutsSurface damage due to improper handling or machining.No deep scratches (>0.2mm)Edge SplittingCracks or splits at …

QUALITY INSPECTION REPORT Product: Green Plastic PP Film Faced PlywoodStandard: EN 314-2, BS 6566, ASTM D1037 Test ItemStandard RequirementTest ResultPass/FailRemarks1. Visual DefectsFilm PeelingNo peelingNonePass–Surface Scratches≤2mm depth, ≤5cm length1.5mm, 3cmPassMinor defectEdge Chipping≤3mm2mmPass–Glue SpotsNot allowedNonePass–Bubbles (≥5mm)≤3 spots/m²1 spot/m²Pass–2. Dimensions & ToleranceThickness (18mm)±0.5mm18.2mmPass–Length & Width Tolerance±3mm+2mmPass–Flatness≤2mm/m1.5mm/mPass–3. Physical PropertiesMoisture Content (%)6-14%9.5%Pass–Density (kg/m³)≥600650Pass–4. Mechanical TestsBending Strength (MPa)≥3035Pass–Modulus of Elasticity (MPa)≥40004500Pass–Glue Shear Strength (MPa)≥1.01.3Pass–5. Film Adhesion TestPeel Strength …

UV PREFINISHED FANCY PLYWOOD QUALITY INSPECTION REPORT [Header Section] Product Name: UV Prefinished Fancy Plywood Client: [Client Name] Order No.: [Number] Production Date: [DD/MM/YYYY] Inspection Date: [DD/MM/YYYY] Inspector: [Name] Batch No.: [Number] [Defects & Test Results Table] | No. | Inspection Item | Standard Requirement | Test Method | Defect Type | Test Result | Pass/Fail | Remarks | |-----|--------------------------|---------------------------------|------------------------|----------------------------|-------------|-----------|---------| …

WHITE BIRCH PLYWOOD QUALITY INSPECTION REPORT Test ItemStandard RequirementTest ResultAcceptance CriteriaDefect Description (if any)1. Visual DefectsSurface CracksNone allowedPass/FailNo visible cracksMinor cracks on surfaceKnots & HolesMax. 3mm diameterPass/Fail≤ 3mm, max 2 per sheetLarge knot (5mm) detectedVeneer GapsNone allowedPass/FailNo gaps between pliesSmall gap in inner layerDelaminationNone allowedPass/FailFully bondedEdge delamination (5cm)2. Dimensions (mm)Thickness Tolerance±0.3mm18.2mm18.0 ± 0.3mmWithin toleranceWidth/Length Tolerance±2mm1220x2440mmAs per orderWithin tolerance3. Moisture Content …

FILM FACED PLYWOOD QUALITY INSPECTION REPORT Product Name: Film Faced PlywoodInspection Date: Batch No.: Supplier: Inspector: Defects Checklist No.Defect TypeDescriptionAcceptance StandardResult (Pass/Fail)Remarks1DelaminationSeparation of veneer layers due to poor glue bonding.No visible delamination on edges/surface.2Core GapsVoids or gaps inside the plywood core.Max. gap ≤ 3mm, not exceeding 5% of area.3Overlapping VeneerVeneer layers overlapping at edges, causing uneven thickness.No overlap allowed on …

Our partner is a leading panel furniture manufacturer with state-of-the-art production facilities in Vietnam and Linyi, Shandong (China). Equipped with imported machinery from world-renowned brands, their factories specialize in crafting high-quality, functional, and stylish panel furniture for global markets. Export Focus: Vietnam Factory: Primarily serves the United States. China Factory: Exports to Canada, Australia, New Zealand, Europe, and other regions (excluding the U.S.). Product Range by Function …