Veneer Core Veneer Core is produced by placing the “lines” of core veneers into the panel “sandwich” so that adjacent plies having a grain direction oriented at approximate right angles to each other. Veneer core panels are relatively light in comparison with composite core panels, typically weighing about 70 pounds per 3/4″ panel. Veneer core offers superior physical properties than either …

Plain Sliced Veneer (PS) The half log, or flitch, is mounted with the heart side flat against the flitch table of the slicer. The slicing is done parallel to a line through the center of the log to produce a distinct figure. Rotary Whole Piece Face Veneer (R) The entire log is cut or “peeled.” It can yield full sheets …

VeneerConstructed using innerplies composed of western softwoods. Veneer core panels are lightweight, dimensionally stable and have excellent screwholding capacity. Hardwood Cross Band (HXB)Combines the smooth finish of a hardwood veneer crossband beneath the hardwood face and back with the strength and durability of western softwood veneer innerplies. Together they create an excellent hardwood plywood panel that is smoother and has …