4MM BIRCH PLYWOOD THROUGHOUT BB/CP 2440MM X 1220MM (8′ X 4′),Inspection Checklist,QC Grading Rules,Testing Standards,Sourcing,Factory auditing

Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.

Thickness4mm
Size2440mm x 1220mm
ApplicationsFeature walls, For use in cabinets, For use in floors, For use in furniture, For use in wardrobes
ClassBS-EN636 Class 2 (suitable for use in Class 1 & 2 humid interior or covered exterior application offering limited resistance to moisture during construction).
Country of originCHINA
EdgingSquare
FeaturesLackarable, Paintable, Varnish & stainable
FinishVeneer finish smooth sanded
Fire ratingNone
Formaldehyde levelE1 (low)
GradeBB/CP
Moisture resistantNo
Number of layers3
Product standardNon structural
VeneerFace-allows 3-6 small colour matched patches & some light mineral streaks. Tight pin knots may also be present, Light in colour but the face can have a slight variation in colour throughout the board, Reverse-allows for unlimited knots & patches. Filled splits also acceptable
Weather exposureExterior (needs to be treated), Interior
Wood speciesBirch
Weight7.14kg

Leave a Reply

Your email address will not be published. Required fields are marked *