Engineered Hardwood Floors Quality Inspection Checklist
Product Basic Information
Product Type: Engineered Hardwood Floors
Wood Species: Hickory
Color Tone: Brown
Surface Texture: Wire brushed
Surface Design: Vintage European
Overall Style: Naturally Worn
Surface Finish: TrueMark Glaze Tek Polyurethane
Carton Weight: 48.28 lbs / carton
Matching Trim Accessories: Threshold, Stair Nose, T-Molding, Reducer (Detailed specifications subject to authorized distributor confirmation)
1. Dimension Inspection (Mandatory Standard)
Verify all floor board dimensions comply with official technical specifications, no out-of-tolerance deviation allowed.
- Length: Up to 7’2″ RL (2184.4mm) – Check full-length consistency of each board, no irregular length cutting
- Width: 9.5″ (241.3mm) – Uniform width across all boards, no narrow/wide deviation
- Thickness: 5/8″ overall (15mm total thickness) with 4mm Sawn Cut wear layer – Strictly inspect total board thickness and reserved wear layer thickness, meet standard size requirements
Inspection Result: □ Pass □ Fail Remarks: _______________
2. Structural & Construction Inspection
Inspect the overall structure and production craftsmanship of engineered hardwood flooring to ensure compliance with standard engineered wood construction requirements.
- Integrated engineered layered structure, no delamination, layering separation or hollow core inside the board
- 4mm sawn cut wear layer is evenly processed, neat cutting edge, no burrs, cracks or incomplete cutting
- Board base is flat and solid, no warping, bending, twisting or deformation
- Consistent structural density, no loose wood texture or internal defects
Inspection Result: □ Pass □ Fail Remarks: _______________
3. Surface Texture & Style Inspection
Check surface processing effect to match designated design and style standards.
- Wire brushed texture: Uniform wire-brush processing on the board surface, natural and consistent texture depth, no missing brushing, uneven texture or over-brushing damage
- Vintage European & Naturally Worn style: Natural worn texture is in line with vintage design positioning, texture distribution is uniform, no artificial rigid traces, consistent style of whole batch products
- Hickory wood grain: Original hickory wood grain is clear and natural, no grain damage, consistent color tone of brown wood surface
Inspection Result: □ Pass □ Fail Remarks: _______________
4. Finish Coating Inspection (TrueMark Glaze Tek Polyurethane)
Inspect the quality and performance of the polyurethane finish layer.
- Surface coating is smooth, flat and uniform, no bubble, pinhole, scratch, peeling, sagging or missing coating
- Coating adhesion is good, no paint flaking or edge peeling
- Finish color is stable and consistent, no color difference, color fading or partial discoloration in the same batch
- Polyurethane finish has complete surface protection, no hard damage or chemical residue
Inspection Result: □ Pass □ Fail Remarks: _______________
5. Appearance Defect Inspection
Full inspection of board appearance to eliminate defective products.
- No surface cracks, splits, dead knots, large-area scarring or insect holes
- No edge chipping, corner damage, notch or irregular cutting on board edges and ends
- No oil stain, water stain, dust pollution or foreign matter adhesion on surface
- Uniform overall color of the batch, no obvious color difference between individual boards
Inspection Result: □ Pass □ Fail Remarks: _______________
6. Packaging & Weight Inspection
- Single carton weight complies with standard: 48.28 lbs/carton, no overweight/underweight abnormal
- Carton packaging is intact, no damage, cracking or moisture penetration
- Internal boards are neatly arranged, no extrusion damage, messy placement
- Complete product labeling, clear specification, model and batch information
Inspection Result: □ Pass □ Fail Remarks: _______________
7. Matching Trim Accessories Check
Optional supporting trims: Threshold, Stair Nose, T-Molding, Reducer. Specific specifications, size and matching models shall be confirmed and inspected in accordance with authorized distributor’s official documents.
Inspection Result: □ Pass □ Pending Confirmation Remarks: _______________
Overall Inspection Conclusion: □ Qualified □ Unqualified
Inspector: _______________ Inspection Date: _______________
Inspection Batch No.: _______________ Quantity Checked: _______________
