Exterior plywood is covered on both sides or on one side with turmalin foil with a net imprint. This makes the plywood has increased abrasive properties, is non-slip and has a marbled visual effect. The surface covered with foil protects the plywood from air moisture. The name “waterproof” refers to the joint between the layers of plywood, which is waterproof …

Exterior plywood both sides (or one sidedly agreed with Customer) covered with phenolic or melamine foil, on which the hexa pattern is imprinted. Thanks to that board is anti-slip and has interesting visual effect. Foil covered surface protect board against moisture and increases resistance to mechanical damage, abrasion and atmospheric conditions. The term ‘waterproof’ refers to a glue joint which …

Plywood is composed from thin layers of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. Interior plywood is covered on one or both sides with melamine film. The filmed surface protects the sheet from moisture and increases resistance to mechanical damage and abrasion. Areas of usefurniture industrypreparation …

Plywood is composed from thin layers of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. Exterior plywood is covered on one or both sides with melamine film which protects the surface from moisture as well as ensures higher durability, weather and abrasion resistance. Areas of usemeans of …

Plywood is composed from thin layers of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. The description ‘waterproof’ relates solely to the resin gluing layers of veneers. The resin is water resistant. Areas of usefurniture industrycarpentrybuilding industryproduction of small wooden accessoriespackaging industryRaw materials used for productionhardwood (birch, …

Raw plywood for interior application is not resistant to weather conditions and should be used in dry environment in places with general low air humidity. For its manufacture is used glue based on urea-formaldehyde resin. Plywood is composed from thin layers of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees …

Plywood is composed from thin layers of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. The plywood has a special structure which allows laser cutting. Plywood surface might be coated on both sides with melamine film or varnish. This type of plywood is designed for usage in …

Anti-slip exterior plywood is coated with phenolic film with a net imprint. That gives the plywood anti-slip properties. Anti-slip surface can be applied on one or both sides of the sheet. Plywood is composed from thin layers of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another. Exterior …

Birch Film Faced plywood is approved solution in need of a top quality formwork plywood. Its film is flat both sides, I/I quality. Panels are available in different thickness from 9 to 21 mm. The birch veneer used achieves the plywood high resistance to load, proven product strenght. Its maximum use (cycles count) in terms of regular use, overpay several …

HEXA laminated plywood is a variety of the well known on the market plywood with WIRE MESH pattern. Here the mesh face of the panel is with impregnated film with heavier load then the usual one and with “honey comb” design, the so called HEXA. The thickness of the anti-slip face guarantees longer exploitation period. Birch veneer of the plywood …