SELEX PLYWOOD CD No Structural AUS
Selex Radiata Pine Non-Structural Plywood has a variety of uses throughout the construction industry, particularly when structural characteristics are not required, whether that means not bearing weight or in cases where there is no requirement to meet the construction codes of Australia or New Zealand. This product offers one side that allows for a certain level of closed and repaired defects, and a reverse side that allows for appearance defects and open defects, conditions that allow it to be used in several applications.
General applications
| Dimensions | 1200 x 2400 | ||||||
|---|---|---|---|---|---|---|---|
| Thickness (mm) | 6.5 | 9 | 12 | 15 | 18 | 21 | 25 |
| Thickness (Inches) | 1/4″ | 11/32 | 15/32 | 19/32 | 23/32 | 13/16 | 1″ |
| No. of layers | 3 | 3 | 5 | 5 | 6/7 | 7 | 9 |
| Density | 480 – 550 kg / m³ | ||||||
| Sanding grain | 150 grit on front and 120 grit on back | ||||||
| Adhesive | Phenol-formaldehyde that complies with Super E0 emission standard | ||||||
| Moisture content | 8% a 12% | ||||||
| Forestry certification | FSC® y PEFC™ certified products |
