Standard for daily maintenance and selection of wood veneer edge banding
Guide: Now many furniture on the market are covered with wood wood veneer . Wood wood veneer edge banding can not only beautify the edges of furniture, but also protect furniture.
The improper protection of the wood veneer edge banding will cause problems such as furniture deformation and delamination. Then, let’s introduce the daily maintenance and selection standard of wood edge banding.
Daily maintenance of wood veneer edge banding strip
1. Pull and handle with care When moving the furniture with wood veneer edge banding, pull and handle with care, so that the wood veneer edge banding will not be damaged and the service life will be affected.
2. In case of high temperature and moisture, the edge sealing of sun proof and moisture proof wooden skin will be deformed and damaged to some extent. Therefore, try to avoid high temperature. You can pad things at the foot of the furniture table to achieve the effect of moisture-proof.
3. Cleaning and anti scalding When cleaning, do not use irritating liquid to wipe the edge of the wood wood veneer , or use boiling liquid such as boiling water to directly place it on the furniture, to avoid the edge of the wood wood veneer from degumming and peeling off the paint.
Selection standard of wood edge banding
1. The wood edge banding strip shall be of good toughness, so that it can be sealed on the board without fracture. 2. Wooden edge banding has good stability and will not shrink or expand due to large temperature difference. 3. Good wood wood veneer edge banding has the advantages of bright color, smooth surface, no blistering, no dragline, moderate gloss, etc. 4. It can be seen whether the surface or bottom surface of the wood veneer edge banding strip is flat, and whether the thickness is even, or the gap between the wood veneer edge banding strip and the board will be too large, which will affect the overall beauty. 5. Check whether the strength of the wood veneer edge banding strip is high and elastic. The better the elasticity, the better the wear resistance; If the elasticity is not high, the abrasion resistance is not high, and the anti-aging ability is low. In addition, according to the actual needs, if manual trimming is required, soft spots can be properly made, and hard spots can be properly made with automatic edge banding machine. 6. Pay attention to whether the glue on the back of the wooden edge sealing strip is even and whether it is easy to fall off during use.
