Essential Characteristics with EN or BS standard testing method
- Moisture Content: EN 13183-1 Result = 7 %
- Width permitted deviation: EN 13647 Result -0.01mm
- Reaction to Fire: EN 13501-1 Result Dn-s1
- Release of Formaldehyde: EN 717-1 Result 0.014 mg/m3
- Breaking Strength: EN1533 Result 22.7 kN
- Slipperiness: CEN/TS 15676 Result USRV 58
- Thermal Conductivity: EN ISO 10456 and EN ISO 12664 Result 0.15 W/(mk)
- Load Bearing: complies with BS 6399-1:1996 Table 1 section 3 for load bearing
Slip test using the pendulum testers method BS7967 part 2 classification the slip resistance group guidelines Slip Potential (PTV) values are as follows:
High slip potential 0 – 24 Moderate slip potential 25 – 35 Low slip potential 36+
As can be seen from the results below of our type tested products our floors have very low slip potential.
Type of Board:
Natural Oiled Wood Flooring Oak Dry overall slip measurement 66
Wet (water) slip measurement 29
Lacquered Wood Flooring Dry overall slip measurement 61
Wet (water) slip measurement 29
Brushed and UV Oiled Wood Flooring Dry overall slip measurement 64
Wet (water) slip measurement 29
You can see our actual testing certificates by clicking the links below:
- Certificate for NON SLIP Lacquered Wood Floors
- Certificate for slip test on Lacquered Wood Floors
- Certificate for slip test on Natural Oiled Wood Floors
- Certificate for slip test on Brushed and Oiled Wood Floors
